Changing System Settings - Cisco TelePresence MX200 Administrator's Manual

Cisco TelePresence MX200 and MX300
Contents

Changing system settings

All system settings can be changed from the System
Configuration page . The value space for a setting is specified
*
either in a drop-down list or by text following the input field.
Different settings may require different user credentials. In
order to be sure that an administrator is able to change all
system settings, an administrator user must possess all user
roles.
You can read more about user administration and user roles
in the ► User administration chapter.
The configuration shown in the illustration serve as an example.
*
Your system may be configured differently.
D14850.10 MX200 and MX300 Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface Web interface
Navigate to: Configuration > System Configuration
System settings
Drop-down list
Click the arrow to open the drop-down
list. Choose the preferred value and click
Save for the change to take effect.
Text input field
Enter text in the input field and click
Save for the change to take effect.
www.cisco.com — Copyright © 2011–2014 Cisco Systems, Inc. All rights reserved.
24
Administrator Guide
Setting passwords Appendices