Winding The Lower Thread - Toyota sp100 series Instruction Manual

Winding the lower thread

1 1
Turn off the
sewing machine.
Main power switch
Complete
8
To stop winding, release the thread winding
switch to the right.
Note:
Do not wind excessively,
it causes sewing malfunction.
Remove the bobbin from the spindle. Cut the
thread.
7
Push the thread winding
switch to the left again.
Wind the thread to the amount
you need.
14
2
right wrong
Note:
Prepare a
specially
designed bobbin.
Pull up the spool pin.
Position the spool of thread and the spool
cap on to the spool pin.
Note:
A felt was originally put on to the spool
pin.
6
Cut extra thread above
the bobbin hole.
Cut the thread so that no
*
excess extends from the
bobbin hole.
Thread guide ( )