How To Change The Power Plug - Toyota sp100 series Instruction Manual

Caution
Do not operate on an unstable surface such as a sofa or a bed.
If the sewing machine falls down, it could cause an injury or damages to the machine.
Do not drop or insert any foreign objects into any openings such as
opening space when you remove the face cover and / or the outer casing
space of bobbin case.
Doing so could cause an injury or damages to the machine.
The machine can be used by, children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge,
only if they are supervised or have been given proper instructions concerning use of the
machine in a safe way and fully understand the hazards involved.
UK ONLY

How to change the power plug

Warning
When you change the power plug or cord, do not repair, disassemble or
modify except at the authorised dealer or service centre.
Doing so could cause an electric shock or a fire
If for any reason the power plug for this product is removed it should be
immediately disposed of safety and not stored anywhere where it could be
inadvertently used again.
Doing so could cause an electric shock or a fire
The wires in this mains lead are coloured in accordance with the following code:
BLUE-NEUTRAL BROWN-LIVE ( OR ACTIVE )
A s the colours of the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug - PROCEED AS FOLLOWS:
The earth plug pin is unnecessary. As the machine is designed under double insulation
structure, the earth wire is removed from the machine. The wire coloured BROWN must
be connected to the terminal marked L or A or coloured RED. The wire coloured BLUE
must be connected to the terminal marked N or coloured BLACK. Neither core is to be
connected to the earth terminal of a three-pin plug.
IMPORTANT PLEASE READ CAREFULLY
1
5