Ignition Switch Positions; Brake Lever Adjuster - Triumph Street Triple Owner's Handbook Manual

General Information

Ignition Switch Positions

This is a four position, key operated switch.
The key can be removed from the switch
only when it is in the OFF, LOCK or P (PARK)
position.
TO LOCK: Turn the key to the OFF position,
push and fully release the key, then rotate it
to the LOCK position.
PARKING: Turn the key from the LOCK
position to the P position. The steering will
remain locked.
Note:
• Do not leave the steering lock in the
P position for long periods of time as
this will cause the
discharge.
Warning
For reasons of security and safety, always
move the ignition switch to the OFF
position and remove the key when leaving
the motorcycle unattended.
Any unauthorised use of the motorcycle
may cause injury to the rider, other road
users and pedestrians and may also cause
damage to the motorcycle.
Warning
With the key in the LOCK or P position the
steering will become locked.
Never turn the key to the LOCK or
P positions while the motorcycle is moving
as this will cause the steering to lock.
Locked steering will cause
motorcycle control and an accident.
44

Brake Lever Adjuster

1
cdmj_1
1. Lever (Street Triple R shown)
2. Adjuster wheel
3. Triangular mark
battery to
An adjuster is fitted to the front brake lever.
The adjuster allows the distance from the
handlebar to the lever to be changed to one
of six positions for Street Triple R or four
positions for Street Triple, to suit the span of
the operator's hands.
To adjust the brake lever, push the lever
forward and
anti-clockwise to align one of the numbered
positions with the triangular mark on the
lever (Street Triple R),
(Street Triple) as viewed from the riding
position to increase the distance, or clockwise
to shorten the distance from the handlebar.
The distance from the handlebar grip to the
released lever is shortest when set to number
six (Street Triple R), or four (Street Triple), and
longest when set to number one.
loss of
2
3
turn the adjuster wheel
or lever holder