Engine Management System Malfunction Indicator Light; Alarm/Immobiliser Indicator Light - Triumph Street Triple Owner's Handbook Manual

General Information
Engine Management System
Malfunction Indicator Light
The malfunction indicator light for
the engine management system
illuminates when the ignition is
switched on (to indicate that it is working),
but should not become illuminated when the
engine is running.
If the malfunction indicator light becomes
illuminated when the engine is running, this
indicates that a fault has occurred in one or
more of the systems controlled by the engine
management system. In such circumstances,
the engine management system will switch to
'limp-home' mode so that the journey may
be completed, if the fault is not so severe that
the engine will not run.
Warning
Reduce speed and do not continue to ride
for longer than is necessary with the
malfunction indicator light illuminated. The
fault may adversely affect
performance, exhaust emissions and fuel
consumption. Reduced
performance could cause a dangerous
riding condition, leading to loss of control
and an accident. Contact an authorised
Triumph dealer as soon as possible to have
the fault checked and rectified.
Note:
• If the malfunction indicator light
flashes when the ignition is switched
on, contact an authorised Triumph
dealer as soon as possible to have
the situation rectified. In these
circumstances the engine will not
start.
40

Alarm/Immobiliser Indicator Light

This Triumph model is fitted with
an engine immobiliser which is
activated when the ignition switch
is turned to the OFF position. If the
motorcycle is fitted with a genuine Triumph
accessory alarm, the immobiliser will operate
as normal but the alarm/immobiliser light will
operate as described below.
With Alarm Fitted
The alarm/immobiliser
illuminate when the conditions described in
the genuine
instructions are met.
Without Alarm Fitted
When the ignition switch turned to the
OFF position, the alarm/immobiliser light will
flash on and off for 24 hours to show that the
engine immobiliser is on. When the ignition
switch is turned to the ON position the
immobiliser and the indicator light will be off.
If the indicator light remains on it indicates
engine
that the immobiliser has a malfunction that
requires investigation. Contact an authorised
engine
Triumph dealer as soon as possible to have
the fault checked and rectified.
light will only
Triumph accessory alarm