Changing Units (Imperial, US
or Metric)
Units has four selectable display modes as
described below:
•
mpg - Imperial gallons;
•
mpg US - US gallons;
•
L/100 km - Metric;
•
km/L - Metric.
Each
display
provides
information:
mpg (Imperial gallons)
The speedometer and odometer will read in
miles.
The
fuel
consumption
measured in imperial gallons.
mpg US (US gallons)
The speedometer and odometer will read in
miles.
The
fuel
consumption
measured in US gallons.
L/100 km (Metric)
The speedometer and odometer will read in
kilometres. The fuel consumption will be
measured in litres of fuel per 100 km.
km/L (Metric)
The speedometer and odometer will read in
kilometres. The fuel consumption will be
measured in kilometres per litre of fuel.
Warning
Do not attempt to change the units display
with the motorcycle in motion as this may
lead to loss of motorcycle control and an
accident.
General Information
To access the units display, with the
motorcycle stationary and in neutral turn the
ignition to the ON position.
Press and release button 'A' until set up is
visible in the display screen then press
button 'B'.
Press and release button 'A' until UnitS is
visible then press button 'B'.
the
following
2
will
be
3
cfir
will
be
1. Display screen
2. Button A
3. Button B
Press and release button 'A' until the desired
display is visible. The display will scroll
through in the following order:
•
mpg - Imperial gallons;
•
mpg - US gallons;
•
L/100 km - Metric;
•
km/L - Metric.
1
25