Right Handlebar Switches; Engine Stop Switch - Triumph Street Triple Owner's Handbook Manual

Warning
For any model, do not attempt to adjust
the lever with the motorcycle in motion as
this may lead to loss of motorcycle control
and an accident.
After adjusting the lever, operate the
motorcycle in an area free from traffic to
gain familiarity with the new lever setting.
Do not loan your motorcycle to anyone as
they may change the lever setting from the
one you are familiar with causing loss of
control and an accident.
General Information

Right Handlebar Switches

1
2
chrm

1. Engine stop switch

2. Starter button
Engine Stop Switch
In addition to the ignition switch being turned
to the ON position, the engine stop switch
must be in the RUN position for the
motorcycle to operate.
The engine stop switch is for emergency use.
If an emergency arises which requires the
engine to be stopped, move the engine stop
switch to the STOP position.
Note:
• Although the engine stop switch
stops the engine, it does not turn off
all the electrical circuits and may
cause difficulty in restarting the
engine due to a discharged battery.
Ordinarily, only the ignition switch
should be used to stop the engine.
45