Installation Position; Operation - Sharp IG-CL15A Operation Manual

INSTALLATION POSITION

Place the main unit on a smooth, stable surface in a room, and insert the plug into
an electric socket.
Installation Guidance
Leave at least 10cm of clearance behind the unit.
UPSIDE more than 60cm
SIDE more than
10cm

OPERATION

Press the Mode Button to directly turn on the power and select the preferred mode.
LIGHTS CONTROL
• If you feel indicator lights are too bright, press the Mode Button for 3 seconds.
The Fan Speed Indicator becomes dimmer.
• If you need original brightness, press the Mode Button again more than 3 seconds.
The Fan Speed Indicator becomes original brightness.
DO NOT USE the below items
near the unit
silicone-containing products*
SPRAY
B A C K S I D E m o r e
than 10cm
*Hair care products, cosmetic prod-
S I D E m o r e t h a n
10cm
E-4
.
PESTICIDES
WAX
ucts, water proof sprays, polish glass
cleaner, wipe and wax.
Release high-density
LOW
Plasmacluster ions quietly.
Light will be on. (blue)
Release high-density
HIGH
Plasmacluster ions at high
fan speed.
Light will be on. (blue)
'OFF'
Power 'OFF'.