To Light The Fire - Valor 639 Owner's Manual

OWNER'S GUIDE

To light the fire

Depress the control
knob and rotate it
anticlockwise to the
pilot ignition position.
A 'click' will be heard
as the integral piezo
operates. A flame
should appear at the
pilot. Keep the control
knob depressed and
hold the pilot ignition
position for five
seconds. When the
control knob is released
the pilot flame should
remain lit. If a flame
Figure 2 - Lighting the Fire.
does not appear at the
pilot then turn the control knob clockwise to the 'OFF' position and repeat the
above.
When the pilot burner is operating properly, gradually turn the control knob anti-
clockwise to 'HIGH' position. (Depress the knob slightly to get past the pilot
ignition position). The main burner should now light.
Depress the control knob slightly to release from the 'HIGH' position and turn back
(clockwise) to 'LOW'. While turning, the burner flames should gradually become
lower but remain alight. Depress the control knob slightly to release from the
'LOW' position and turn back (clockwise) to the Pilot ignition position. The main
burner should extinguish but the pilot should remain alight. Depress the control
knob slightly and turn back (clockwise) to turn OFF. This will extinguish the pilot.
While cooling, the coals / Pebbles may make some crackling noises. This is quite
normal.
Page 8