Table of Contents

Advertisement

Quick Links

I
NTRODUCTION
English
MAESTRO 2055

Introduction

Belgacom thanks you for choosing the Maestro 2055, a telephone for both the home and
the office, which offers many advanced services such as :
- Incoming call numbers display and the storage of these numbers, times and dates of calls.
- SMS sending, receiving and storing

EU Statement of Compliance

Industrie Dial Face S.p.A., based at 4 Via Canzo 20068 - Peschiera Borromeo (MI) Italy, declares under
its own responsibility that the Maestro 2035 telephone equipment complies with the following stan-dards:
EN 55024, EN 55022 – Electro-magnetic compatibility
EN 60950 – Electrical Safety
and meets the requirements of Directive 1999/5/CE of the European Parliament and Council dated 9
March 1999 in relation to radio equipment and telecommunication terminals and the recognition of
reciprocal compliance.
Compliance with these provisions is demonstrated by the mark

Use of the telephone

The telephone has been designed for connection to Belgacom analogue telephone network.

Important advice

Do not use the telephone in an environment which is excessively humid, dusty, gas saturated or with
risk of water contact. In addition, do not expose it to direct sunlight or other sources of heat. It is advised
not to place the device on slippery or delicate surfaces but to install it at a distance of at least one meter
from other devices that are the source of parasites such as cordless equipment, beepers, televisions and
industrial machinery, etc. Clean it by using a damp cloth or antistatic wipe. Do not use dry cloths or
corrosive cleaners.
Where the device remains unplugged from the network in order to preserve it, it is advisable
to remove the batteries from their housing to avoid any damage by contacts due to the leakage of
the liquid they contain.
Each of these conditions can affect the operating and appearance of the product over time.
For safety reasons, always unplug the network cable before removing the batteries,
when replacing them and also during telephone maintenance.
Keep this user manual safe and observe environmental standards when discarding the equipment.
1
User manual MAESTRO 2055

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MAESTRO 2055 and is the answer not in the manual?

Questions and answers

Summary of Contents for BELGACOM MAESTRO 2055

  • Page 1: Introduction

    MAESTRO 2055 Introduction Belgacom thanks you for choosing the Maestro 2055, a telephone for both the home and the office, which offers many advanced services such as : - Incoming call numbers display and the storage of these numbers, times and dates of calls.
  • Page 2: Table Of Contents

    Erase a name of the Phonebook ....................26 3.5.8 VIP list ............................27 3.5.9 Black list ............................. 27 3.5.10 Free memory ..........................28 3.5.11 Storing a number of the CLI list in the Phonebook ..............28 User manual MAESTRO 2055...
  • Page 3 Warranty ..............59 User manual MAESTRO 2055...
  • Page 4: Installation And Start-Up

    Ringer deactivated, Filtre VIP, Black list, box A/B/C hidden number, ring delayed A/B/C SMS Memory messages Alarm On full for box A/B/C Alarm not stopped New not answered incoming calls PhoneMail Hands-free/Group-listening Batteries off Direct call activated User manual MAESTRO 2055...
  • Page 5: Content Of The Box

    1 spiral cord 1 base 1 AC/DC supplier (with guarantee card) All the functions are available if the telephone is supplied via AC/DC supplier and/or via 3 batteries 1.5Vdc size AA. Batteries are not provided with the telephone. User manual MAESTRO 2055...
  • Page 6: Installing The Telephone

    (B) and close the cover. N.B. Batteries or AC/DC supplier or both may be used. Important: before to take the cover out, the ine cord MUST NOT be connected to the Maestro 2055. After this operation, the Maestro 2055 installation is finished.
  • Page 7: Replacing The Batteries

    SMS Function ....Activated Dialling mode ....DTMF User manual MAESTRO 2055...
  • Page 8: Technical And Functional Features

    - SMS Centers numbers programmability - Eatoni (predictive mode of writing SMS) - 4 languages (FR/NL/D/UK) - Wall mounting - Supply via AC/DC (230Vac main) supplier or by 3 batteries 1,5 V / type AA (not included). User manual MAESTRO 2055...
  • Page 9: Customisation Programming

    Settings Display Ring Clock Fast call Direct call PABX prefix PABX pause Flash CLI on CW Language Lock PIN Reset code Keyboard lock - - - Phone info SMS subaddresses Ring settings Direct call SW release User manuali MAESTRO 2055...
  • Page 10: Setting The Language

    ➤ Always on via Ωπ keys and press [OK] to pour confirm. Note: the option “Always on” cannot be activated if the Maestro 2055 is supplied via AC/DC supplier. If "Contrast", select the desired level (de 1 à 12) via Ωπ keys and press ➤...
  • Page 11: Serring Time And Date

    Press [Menu] key to enter in the main menu . ➤ Scroll the menu items via Ωπ keys to select "Settings" and press ➤ [OK] to confirm. Press Ωπ keys to select "Ring" and press [OK] key to confirm. ➤ User Manual MAESTRO 2055...
  • Page 12: Setting The Ringer Volum Level

    Scroll the menu items via Ωπ keys to select "Settings" and press ➤ [OK] to confirm. Press Ωπ keys to select "Ring" and press [OK] key to confirm. ➤ Press Ωπ keys to select “Ring mode”. Then press [OK] key to confirm. ➤ User manual MAESTRO 2055...
  • Page 13: Vip Filter

    When this filter is active,the telephone will not ring for calls incoming from numbers stored in the "Black list". To activate or deactivate the filter,proceed as follows: Enter the menu item '"Ring" as described previously ➤ Select the "Black list" item via Ωπ keys,then press [OK] key to ➤ confirm. User Manual MAESTRO 2055...
  • Page 14: Setting The "Fast Call

    Repeat the above procedure to select an empty memory ( 0 to 9) to be ➤ programmed Press [Assign.] key to access the "Main menu" ➤ Press [Ph. Book] key and select a Phonebook name/number via Ωπ ➤ keys. User manual MAESTRO 2055...
  • Page 15 "Use number". Press [OK] key to confirm. To erase: Select the Fast call memory to be erased by pressing Ωπ keys. ➤ Press the [Options] key ➤ Select "Erase" by pressing Ωπ keys and press 2 times [OK] key to ➤ confirm. User Manual MAESTRO 2055...
  • Page 16: Setting "Direct Call

    [OK] to confirm. Press Ωπ keys to select "PABX prefix" and press [OK] key to ➤ confirm. If this memory is empty, enter the prefix (1 to 4 digits) and press [OK] key ➤ to confirm. User manual MAESTRO 2055...
  • Page 17: Setting Pabx Pause

    Scroll the menu items via Ωπ keys to select "Settings" and press ➤ [OK] to confirm. Press Ωπ keys to select "CLI on CW" and press [OK] key to confirm. ➤ Select "Activate?" / "Deactivate?" via Ωπ keys and press [OK] key to ➤ confirm. User Manual MAESTRO 2055...
  • Page 18: Setting The Keypad Lock Pin

    Enter a 4 digits Code and press [OK] key to confirm. ➤ Reset Code 1234 ..to go back to manufacturing condition 0710 ..to go back without erasing Phonebook, Lists, Messages User manual MAESTRO 2055...
  • Page 19: Use Of The Telephone

    Pick up the handset or press the key.The display will show the time ➤ elapsed since the line has been engaged (after 10 secs) and the menu "Ph. Book". Release the line at the end of the conversation. ➤ User manuali MAESTRO 2055...
  • Page 20: Making A Call

    ∏ Press key to access the last called numbers memory. The list of the last ➤ called numbers is displayed. Scroll the numbers of the list via Ωπ keys to select the name-number ➤ to call. User manual MAESTRO 2055...
  • Page 21: The Phonebook

    ➤ 3.5 The Phonebook The Maestro 2055 has a phonebook of 250 name - number (max: 20 characters and 26 digits). It is possible to store up to 3 numbers per name. Options of the Phonebook menu: - Call...
  • Page 22: Storing In The Phonebook

    Call showing nr. to show the number in the event of incoming call Call anonymous to not show the number in the event of incoming call Choose one of the 4 options and confirm via [OK] key. ➤ User manual MAESTRO 2055...
  • Page 23: Modify Numbers Of The Phonebook

    Note: this number will be placed at 1st position when making a call. To set the type (icon) of number : Select one of the 3 numbers associated to that name and press [Options] ➤ key. Select "Type" via Ωπ keys and press [OK] to confirm. . ➤ User manual MAESTRO 2055...
  • Page 24 Select "Fast call" via Ωπ keys and press [OK] to confirm. ➤ Select a Fast call memory key (a number from 0 to 9) via Ωπ keys and ➤ press the [Assign] key to confirm. User manual MAESTRO 2055...
  • Page 25: Modify Names Of The Phonebook

    Press [OK] key to confirm. ➤ Press the Ωπ keys to select the new number of melody (from 0 to 15), ➤ with 0 corresponding to the default melody . Press [OK] key to confirm. ➤ User manual MAESTRO 2055...
  • Page 26: Ring Filter

    Select the name (to be removed) via Ωπ keys. ➤ Press the [Options] key. ➤ Select "Erase" via Ωπ keys and press [OK] to confirm. ➤ Press [OK] key to confirm. The name and its numbers are removed. ➤ User manual MAESTRO 2055...
  • Page 27: Vip List

    The Black list is a list of names-numbers stored in the Black memory. To add or to erase an element of this list proceed as follows: Press the [Ph. Book] key. ➤ Press the [Options] key. ➤ Select “Show black list” via Ωπ keys. ➤ Press [OK] key to confirm. ➤ User manual MAESTRO 2055...
  • Page 28: Free Memory

    The numbers of the callers, stored in the CLI list, may be stored in the Phonebook as follows: Press the [Menu] key. ➤ Press the Ωπ keys to select "Call list". ➤ Press [OK] key to confirm. ➤ Press the Ωπ keys to select "Received". ➤ User manual MAESTRO 2055...
  • Page 29: Storing A Number Of The Ln Dialled List In The Phonebook

    Phonebook. Press the [Options] key. ➤ Press Ωπ keys to select "Save". ➤ Press [OK] key to confirm. ➤ ∂ Enter the name (press [Erase] or keys to erase). ➤ Press [OK] key to confirm. ➤ User manual MAESTRO 2055...
  • Page 30: Dialling Numbers Of The Phonebook / Vip / Fast Call

    Once the telephone is in idle mode, press and hold pressed for a second ➤ a key (from 0 to 9) associated to the Fast call number to be dialled. The number will be displayed and then dialled out. User manual MAESTRO 2055...
  • Page 31: Caller Identification

    SE OF THE TELEPHONE English 3.7 Caller identification The Maestro 2055 offer the CLIP and CNIP services ( provided by Belgacom under subscription). When a call incomes, the handset icon ( ) is displayed if the call has not ➤...
  • Page 32: Call A Number Of The "Received" Call List

    Select "Call list" via Ωπ keys. Press [OK] to confirm. ➤ Select "Erase all" via Ωπ keys. Press [OK] to confirm. ➤ Select "Received" via Ωπ keys. Press [OK] to confirm. ➤ Press [OK] to erase the "Received" call list. ➤ User manual MAESTRO 2055...
  • Page 33: 2Nd Call Handling

    3.9 Mute the Microphone When in conversation, the user can deactivate the microphone by ➤ ∂ pressing the key. The display will show “Microphone off”. To make ∂ the microphone working, press the key again. “Microphone off” will disappear. User manual MAESTRO 2055...
  • Page 34: Loudspeaker Volume Adjusting

    - Weekly it beeps each week at the programmed time. - Daily it beeps each day at the programmed time. - Hourly it beeps at time intervals equal to programmed numbers of hours. User manual MAESTRO 2055...
  • Page 35 Enter Day, Hours, Minutes as ddd hh:mm. Enter the day by selecting ddd field and entering a digit from 1 to 7. (1=Sun 2=Mon, 3=Tue, 4=Wed, 5=Thu, 6=Fri, 7=Sat). Reminder - Daily : Enter Hours, Minutes as hh:mm. User manual MAESTRO 2055...
  • Page 36 Select "List" via Ωπ keys and press [OK] key to display the Reminders ➤ list. Select the Reminder to be deactivated / activated via the Ωπ keys and ➤ press the [Show] key. The note is displayed. User manual MAESTRO 2055...
  • Page 37 Any action of the user on the telephone, will stop the alerting signal. If no action will be done, the telephone will beep for 1 minute, then the icon will be displayed. When the alert signal beeps, it is possible to press [Répéter] to repeat the Reminder 5 minutes later. User manual MAESTRO 2055...
  • Page 38: Phone Info

    / deactivated setting will be displayed. Press [∆] key to go back. ➤ Select "SW release" via Ωπ keys and press [OK] key to confirm. The ➤ SW version with its date an time of generation will be displayed. User manual MAESTRO 2055...
  • Page 39: Network Services

    The telephone provides a Network services menu to use in easy mode services as the Call forwarding, the Fixed destination call, the handling of the Call Waiting and the Ring back (CCBS). A few services may be not available on the telephone line; please contact Belgacom to ask for more infos. 4.1 Call forwarding The service allows the user to forward an incoming call to another telephone number.
  • Page 40: Call Forwarding If Not Reply

    Press [OK] to confirm. The activation code followed by the entered number ➤ are displayed, the line is engaged in Hands-free mode and the displayed sequence is dialled out. Press the ∑ key to go back to idle. ➤ User manual MAESTRO 2055...
  • Page 41: Call Foewarding When Busy

    Press [OK] to confirm. The activation code followed by the entered number ➤ are displayed, the line is engaged in Hands-free mode and the displayed sequence is dialled out. Press the ∑ key to go back to idle. ➤ User manual MAESTRO 2055...
  • Page 42: Fixed Destination Call

    Press [OK] to confirm. The activation code followed by the entered number ➤ are displayed, the line is engaged in Hands-free mode and the displayed sequence is dialled out.The service is activated. Press the ∑ key to go back to idle. ➤ User manual MAESTRO 2055...
  • Page 43: Call Waiting (2Nd Call)

    Select "Call waiting" via Ωπ keys and press [OK] key to confirm. ➤ Select "Activation" via Ωπ keys and press [OK] key to confirm. ➤ The activation code is displayed, the line is engaged in Hands-free mode and the displayed sequence is dialled out.The service is activated. User manual MAESTRO 2055...
  • Page 44: Ring Back

    Select "Deact. ring back" via Ωπ keys and press [OK] key to confirm. ➤ The deactivation code is displayed,the line is engaged in Hands-free mode and the displayed sequence is dialled out. Press the ∑ key to go back to idle. ➤ User manual MAESTRO 2055...
  • Page 45: Phonemail And Services

    Ωπ keys to select the desired ➤ service. Press the [Options] key to confirm. ➤ Select the option “Call” and press the [OK] key to confirm. ➤ The number of the selected service is dialled out. ➤ User manual MAESTRO 2055...
  • Page 46 Check the Phonemail (in both cases : idle or line engaged)as described before. After all the messages have been heard, when in idle the icon and the infor- mations will disappear. User manual MAESTRO 2055...
  • Page 47: Additional Options

    Display a number. ➤ Press the [Options] keys. ➤ Select "Save" via Ωπ keys ➤ Press [OK] key to confirm. ➤ Enter the name ➤ Press [OK] key to confirm. The name-number is stored in the Phonebook. ➤ User manual MAESTRO 2055...
  • Page 48: Introducing A Pause

    Press the [Options] key. ➤ Select "Call anonymous " via Ωπ keys. ➤ Press [OK] to confirm. The line is engaged in Hands-free mode and the ➤ code *31* followed by the number is displayed and dialled out. User manuali MAESTRO 2055...
  • Page 49: Options In Conversation Mode

    When the user is in conversation with one of two partners,it can: ≥ press the ➤ or press the [Options] key, select "Alternate" via Ωπ keys,press the ➤ [OK] key to confirm and to switch from one to the other parner. User manual MAESTRO 2055...
  • Page 50: Conference Call

    1 or: Press the [Options] key, select "Terminate call" via Ωπ keys and ➤ press [OK] key to confirm.This operation sends the R1 code onto the line. User manuali MAESTRO 2055...
  • Page 51: Use Of Sms Service

    6.1 Configuring the SMS service The MAESTRO 2055 can send and receive SMS. The function is active at delivery and it works if con- nected to a SMS service center. The SMS center numbers are 1717 for outgoing SMS and 01717 for the incoming SMS.
  • Page 52: Assign A Name To A Sms Box

    Select "SMS Box number" via Ωπ keys. Press [OK] key to confirm.. ➤ Choose a Box number (from 0 to 9) via Ωπ keys or by pressing a 0 to ➤ 9 key of the keyboard. Press [OK] key to confirm.. User manual MAESTRO 2055...
  • Page 53: Assign A Pin Code To A Sms Box

    ➤ Select a Box via Ωπ keys. Press [OK] key to confirm. ➤ Select "Settings" via Ωπ keys. Press [OK] key to confirm. ➤ Select "Box deactivation" via Ωπ keys. Press [OK] key to confirm. ➤ User manual MAESTRO 2055...
  • Page 54: Activate A Sms Box

    ➤ ∂ the cursor via and [Erase] keys. After the text has been entered, press the [Options] key to display the ➤ options list. Select "Send" via Ωπ keys and press [OK] key to confirm. ➤ User manual MAESTRO 2055...
  • Page 55: Reading And Options Of The Sms Sent

    SMS will be displayed. Select a destination number via Ωπ keys and press [OK] to confirm. ➤ The message is displayed. Press the [Options] key to access the "Options" sub-menu. ➤ User manual MAESTRO 2055...
  • Page 56: Sms Receiving

    Phonebook or to call the number 6.3 SMS Receiving In the event of a call incoming from a SMS center, the Maestro 2055 answer automatically to re- ceive the message (if the box of destination has been activated). The icon is displayed when a message has been received.
  • Page 57: Options Menu "Read Received

    The 0 key allows to enter a space between characters. Starting to write a new message, the alphanumeric keys generate small letters.It is possible to gener- ate capital letters, digits and symbols by selecting the desired function in the "Options" menu. User manual MAESTRO 2055...
  • Page 58 The crossed-bin symbol invites you to use those systems. If you need more information on the collection, reuse and recycling systems, please contact your local or regional waste administration. You can also contact us for more information on the environmental performances of our products. User manual MAESTRO 2055...
  • Page 59: Warranty

    ............................. . . *delete as appropriate User manual MAESTRO 2055...
  • Page 60 English Warranty Selected with care by Belgacom, the terminal equipment you have bought is covered by a parts and labour warranty against all equipment flaws or manufacturing defects for a period of two years, unless any contractual provisions are made to the contrary.

Table of Contents