Removing The; Removing The Rear Cover - Canon LaserBase MF5600 Service Manual

2) Remove the front screw [1] and then remove the
claw [2].
3) Slightly lift up the left side of the unit and remove
the cover as if you were opening the bottom side of
the left cover [3].
[2]
[3]
[1]
F-3-417
3.6.1.6 Removing the Front
Cover
1) Remove the arm claws [1] to disengage the
connection.
2) Remove the shafts on both sides [2] and remove the
front cover [3].
[3]
[1]
F-3-418
0002-7202
[2]
3.6.1.7 Removing the Rear
Cover
1) Remove two screws [1].
[1]
F-3-419
2) Opening the face-up cover [1], and then lower the
fixing pressure release levers [2] on both sides and
release the pressure.
3) Remove the rear cover [3] as you slide it toward the
rear.
[2]
[1]
[3]
F-3-420
Chapter 3
0002-7204
[1]
3-97