Removing The Left Cover; Removing The Ncu Board; Removing The Ncu Case - Canon LaserBase MF5600 Service Manual

Chapter 3
3.2.4.5 Removing the Left
Cover
1) Remove the two screws [1] on the back side.
F-3-250
2) Remove the front screw [1] and then remove the
claw [2].
3) Slightly lift up the left side of the unit and remove
the cover as if you were opening the bottom side of
the left cover [3].
[2]
[3]
[1]
F-3-251
3.2.4.6 Removing the NCU
Board
1) Remove the two connectors [1] and the flat cable
[2].
2) Remove the two screws [3] and remove the NCU
board [4].
3-58
0002-7762
[1]
0006-3646
[3]
[4]
[2]
F-3-252
3.2.4.7 Removing the NCU
Case
1) Remove the three screws [1]; then, pull the upper
portion of the NCU case [2] toward you, and lifting
it upward, remove the NUC case.
[2]
F-3-253
[1]
0006-3645
[1]