Removing The; Removing The Ncu Board And Modular Board - Canon LaserBase MF5600 Service Manual

3.5.2.6 Removing the Front
Cover
1) Remove the arm claws [1] to disengage the
connection.
2) Remove the shafts on both sides [2] and remove the
front cover [3].
[3]
[1]
F-3-321
3.5.2.7 Removing the Rear
Cover
1) Remove two screws [1].
[1]
F-3-322
2) Opening the face-up cover [1], and then lower the
fixing pressure release levers [2] on both sides and
release the pressure.
3) Remove the rear cover [3] as you slide it toward the
rear.
0002-7119
[2]
0002-7122
[1]
[2]
[1]
[3]
F-3-323
3.5.2.8 Removing the NCU
Board and Modular Board
1) Remove the two connectors [1] and the flat cable
[2].
2) Remove the four screws [3] and remove the NCU
board [4] and modular board [5].
[2]
[3]
[4]
[5]
[3]
F-3-324
Chapter 3
0006-3668
[3]
[1]
3-75