Chapter 4
4.5.19 U-turn Roller Gear
Area of application: [1]
Grease: MOLYKOTE EM-50L
Amount: approx. 12 mg
Location of application:
- all the surface of the teeth
- support shaft
[1]
F-4-23
4.5.20 Roller Shaft End Face (front)
Area of application: [1]
Grease: IF-20
Amount: approx. 12 mg
Location of application:
- the front end face of each roller shaft (i.e., the area where contacts the grounding plate).
[1]
F-4-24
4.5.21 Roller Shaft End Face (rear)
Area of application: [1]
Grease: IF-20
Amount: approx. 12 mg
Location of application:
- the rear end face of the U-turn roller shaft (i.e., the area where contacts the grounding plate).
[1]
F-4-25
4-22
0002-8018
0002-8027
0002-8033