Connecting Video I/O To A Master Or Hd Station - IBM Z PRO 6223 Hardware Setup Manual

3 Connecting System Components
The Slave Renderer should be connected as shown in the following diagram.
Slave Render Station (IBM 336)

Connecting Video I/O to a Master or HD Station

Use the Lustre video components to set up video I/O and a broadcast monitor. The only video
hardware you must provide are a sync generator, a VTR, and an SD or HD SDI broadcast
monitor. The following components are included in your hardware shipment.
34
Category 6 1000 Base-T
Crossover Cable
ACT
LINK
Windows- or Linux-Based
IBM IntelliStation Z Pro 6223
Port 1