IBM Z PRO 6223 Hardware Setup Manual page 39

Connecting Video I/O to a Master or HD Station
DVS Centaurus board and DVS Breakout Box II (optional) — The DVS Centaurus board
provides video I/O. Use the DVS Breakout Box II for serial control of a VTR or other slave device
and LTC output to an audio device.
NVIDIA Quadro® FX graphics board — The NVIDIA Quadro FX graphics board provides
output to your computer monitor.
EIZO 24-inch or Sony 21-inch wide screen LCD graphics monitor — The EIZO and Sony
LCD graphics monitors feature a wide screen that makes a 16:9 aspect ratio possible for HD
projects. With these monitors, the application runs at a maximum resolution of 1920x1200. For
instructions on connecting the graphics monitor, see "Connecting the Monitor" on page 20.
Altinex® DA1804NT video distribution amplifier — The Altinex video distribution
amplifier can serve a bi-level (SD) or tri-level (HD) sync signal to up four video hardware
devices from a single sync source/generator. It serves the sync signal to the NVIDIA graphics
board and the DVS Centaurus board.
Video I/O for Real-Time Deliverables
The following illustrations show the video I/O wiring for FX5500 and FX4000 workstations that
can play out to a VTR through the DVS board (real-time deliverables).
35