Imprinter Specifications - Kodak i250 User Manual

Imprinter
Specifications
C-18
The resolution of the character fonts is 96 dpi across the width of the scanner.
However, the font resolution varies with the direction that the paper is fed into
the scanner. This variable allows the creation of an easy-to-read character
string. The approximate resolution of the printed output is shown below.
Cine
Comic
Changes to the print string, other than automatic, sequential number
advances, require a host command to restart the imprinter. You must
initiate a change between documents or batches. Changes cannot be done
automatically or between documents "on the fly."
NOTE: The minimum document width for using the imprinter is
14 cm (5.5 in.).
Maximum lines
Print locations (horizontal)
Print locations (vertical)
Print orientation
Font size
Ink cartridge
Print side
Minimum imprinting distance
from document edge
Static fields available
Dynamic fields available
Languages supported
Resolution (dpi)
Small
85 dpi
115 dpi
1
14, manually set
Set by host
Cine or Comic
Large or Small
HP51604A or compatible
Rear (post-scan)
0.89 cm (0.35 in.)
User-specified via host
Up to nine-digit sequential document
number, date, four-digit time
Any phonetic language (for example,
Danish, Dutch, English, Finnish, French,
German, Italian, Norwegian, Portuguese,
Spanish, Swedish)
A-61167 September 2002
Large
63 dpi
85dpi