Removing The Foam Sheet; Scanner Components; Front - Kodak i250 User Manual

Removing the
Foam Sheet

Scanner Components

Front

1 Scanner door
2 Gap release lever
3 Scanner door release
4 Paper guides
5 Input tray
6 Input tray extender
7 Front panel
8 Front panel latch
A-61167 September 2002
The scanner is packed with a foam sheet inside to protect the rollers during
shipping. This foam sheet must be removed before you can begin scanning.
1. Lift the scanner out of the box and place it on a stable, level work surface
that is capable of supporting it.
2. Lift up the scanner door release to unlatch the scanner door.
3. Pull up to open the scanner door.
4. Remove the foam sheet.
5. Lower the scanner door and press it down firmly until it latches into place.
1
2
3
4
5 6 7 8
9