Installing The Scanner; Site Specifications; System Requirements - Kodak i250 User Manual

I200 series

Hide thumbs Also See for i250:

Table of Contents

Installing the Scanner

A-61167 September 2002

Place the scanner:

• in a clean area with temperature and relative humidity typical of an

office environment

IMPORTANT: Only use the scanner and power supply indoors in a

dry location.

• on a stable, level work surface capable of supporting the following weights:

- i250 Scanner: 12.5 kg (27.5 lb.)

- i260 Scanner: 13.9 kg (30.5 lb.)

- i250 Scanner with optional flatbed accessory: 19.8 kg (43.5 lb.)

- i260 Scanner with optional flatbed accessory: 21.2 kg (46.5 lb.)

• within 1.52 metres (5 feet) of an electrical power outlet

NOTE: For more information about the scanner specifications, refer to

Appendix A, Specifications.

Following is the minimum system configuration to run the i250 Scanner or

i260 Scanner.

NOTE: The actual performance of the system depends on the scanning

application, choice of scanning parameters, and the host computer

configuration. If the scanner is not performing at the optimal speed,

a faster computer and/or more RAM may be necessary to obtain the

rated throughput.

• IBM PC (or compatible) with a Pentium III 1GHz processor

• Microsoft Windows 98SE, Windows Me, Windows 2000, or Windows XP

• 100 MB of available hard disk space (200 MB is recommended)

• 128 MB RAM

• Monitor (VGA)

• Mouse

Table of Contents

I260