Wave Guide/Wave Guide Cover Parts - TurboChef NGC (Tornado) Service Manual

36
        : Wave Guide Cover/Wave Guide Removal and Replacement
5. Clean the oven floor where the new Wave
Guide Cover will sit with Acetone.
6. Apply a 1/8" diameter bead of high temperature
RTV (P/N 102562) along the outside edge of
the flanges surrounding the Wave Guide.
   : It is important to use the correct high
temperature RTV as supplied by TurboChef.
7. Place the new Wave Guide Cover in place.
Secure with the fourteen (14) #8 Sheet Metal
Screws removed in Step 3 .
35
37
42
43

WAVE GUIDE/WAVE GUIDE COVER PARTS

Figure 17
35. NGC-1097 Assy, Wave Guide Cover
36. 102921 Screws, #8-32 x 3/8", SS
37. 101688 Screws, #8 x 1/2" Sheet Metal
PTH
38. NGC-1047 Support, Frame
Screws, #8-32 x 3/8" CSK (100 º )
39. 102809
40. NGC-1106 Assy, Wave Guide #2
41. 100861 Magnetron #2
42. 100861 Magnetron #1
Assy, Wave Guide #1
43. NGC-1044
THE MICROWAVE SYSTEM
39
40
38
41
25