TurboChef NGC (Tornado) Service Manual page 14

THEORY OF OPERATION 7
Events
A single operational element that is a part of a Recipe. Each Recipe may have up to six Events depending
on programming. Each Event lasts a percentage of the Total Cook Time and can be set between 0 and
100% of the Total Cook Time. The sum of all the Event Percent (%) Times must equal 100%.
Total Cook Time
The total duration of a Recipe.
Percentage (%) Time
An event subset that specifies the duration of the Event.
Percentage (%) Air
An event subset that specifies the relative amount of impingement airflow (speed of convection motor)
during the Event. Valid between 10 and 100%.
   : Maximum 100% = 7100 RPM Blower Motor Speed. Blower Motor Speed scale is linear.
Percentage (%) Microwave (MW)
An event subset specifying the microwave cycle (on time) during the Event. Valid between 0 and 100%.
Fault Code
A code assigned to an Event that the Control considers to be a failure. Upon discovering a Fault, the
Control will display the Fault Code and a brief description of the failure. The Control will also increment
the Fault Code Counter.
Error Message
A message that is displayed when an unusual event occurs. The Control will display the Error Message
only when it occurs. Error Messages are not logged in the Fault Code Counter.