Table of Contents
Advertisement
3.6.2 South Bridge Configuration Sub-Menu
This menu gives options for customizing South Bridge Chipset settings. Select a
menu by highlighting it using the Arrow (/) keys and pressing Enter. The
settings are described on the following pages.
Main
South Bridge Chipset Configuration
HDA Controller
SMBUS Controller
SLP_S4# Min. Assertion Width
Restore on AC Power Loss
Onboard VGA
Lan1
Lan2
Chassis Intrusion Detect
Feature
South Bridge Chipset Configuration
HDA Controller
(S5376WAG2NR only)
SMBUS Controller
SLP_S4# Min.
Assertion Width
Restore on AC Power
Loss
Onboard VGA
Lan1/Lan2
Chassis Intrusion
Detect
BIOS Setup Utility
Advanced
PCI/PnP
Option
Enbled
Disabled
Enabled
Disabled
4-5 seconds
3-4 seconds
2-3 seconds
1-2 seconds
Power Off
Power On
Last State
Enabled
Disabled
Disabled
Enabled
Disabled
Enabled
http://www.tyan.com
Boot
Security
[Enabled]
[Enabled]
[1~2 seconds]
[Power Off]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
Enable or disable HDA controller
Enable or disable SMBUS controller
Select Timing for SLP_S4#
Configure how the system board
responds to a power failure.
Enable or disable Onboard VGA
controller
Enable or disable LAN1/LAN2
Enable/Disable the function of chassis
intrusion detect. When chassis open
event is detected, BIOS will record the
event.
67
Chipset
Exit
← → Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1
General Help
F10 Save and Exit
ESC Exit
Description
Advertisement
Table of Contents
