TYAN Tempest i5000VF S5370 User Manual
  1. Manuals
  2. Brands
  3. TYAN Manuals
  4. Motherboard
  5. Tempest i5000VF S5370
  6. User manual
TYAN Tempest i5000VF S5370 User Manual

TYAN Tempest i5000VF S5370 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

///
Tempest i5000VF
S5370
Version 1.2
Copyright
Copyright © TYAN Computer Corporation, 2006. All rights reserved. No part of
this manual may be reproduced or translated without prior written consent from
TYAN Computer Corp.
Trademark
All registered and unregistered trademarks and company names contained in
this manual are property of their respective owners including, but not limited to
the following.
TYAN, Tempest i5000VF are trademarks of TYAN Computer Corporation.
Intel, Blackford-VS, and combinations thereof are trademarks of Intel
Corporation.
Phoenix, Phoenix-AwardBIOS are trademarks of Phoenix Technologies.
Microsoft, Windows are trademarks of Microsoft Corporation.
SuSE,is a trademark of SuSE AG.
IBM, PC, AT, and PS/2 are trademarks of IBM Corporation.
Notice
Information contained in this document is furnished by TYAN Computer
Corporation and has been reviewed for accuracy and reliability prior to printing.
TYAN assumes no liability whatsoever, and disclaims any express or implied
warranty, relating to sale and/or use of TYAN products including liability or
warranties relating to fitness for a particular purpose or merchantability. TYAN
retains the right to make changes to product descriptions and/or specifications
at any time, without notice. In no event will TYAN be held liable for any direct or
indirect, incidental or consequential damage, loss of use, loss of data or other
malady resulting from errors or inaccuracies of information contained in this
document.
1

Advertisement

Table of Contents
loading

Related Manuals for TYAN Tempest i5000VF S5370

Summary of Contents for TYAN Tempest i5000VF S5370

  • Page 1 In no event will TYAN be held liable for any direct or indirect, incidental or consequential damage, loss of use, loss of data or other malady resulting from errors or inaccuracies of information contained in this document.

  • Page 2: Table Of Contents

    Table of Contents Check the box contents! Chapter 1: Introduction Congratulations…………………………………………………………… Hardware Specifications………………………………………………… Chapter 2: Board Installation Board Image……………………………………………………………… Block Diagram……………………………………………………………. Board Parts, Jumpers and Connectors………………………………... 10 Tips on Installing Motherboard in Chassis…………………………….. 19 Installing the Processor(s)………………………………....... 20 Installing the Memory……………………………………………………. Attaching Drive Cables…………………………………………………..

  • Page 3: Check The Box Contents

    1 x USB2.0 cable 1 x S5370 user’s manual 1 x S5370 Quick Reference guide 1 x TYAN driver CD 1 x I/O shield 2 x CPU Back Plane If any of these items are missing, please contact your vendor/dealer for...

  • Page 5: Chapter 1: Introduction

    S5370 offers exceptional performance and versatile solution for your server platform. Remember to visit TYAN’s Website at http://www.TYAN.com. There you can find information on all of TYAN’s products with FAQs, online manuals and BIOS upgrades. 1.2 - Hardware Specifications Processor Integrated LAN Controllers •Dual LGA771 sockets...
  • Page 6 •Serial Console Redirect •PXE via Ethernet, USB device *FB-DIMM: Fully Buffered DIMM Expansion Slots boot •Two (2) PCI-Express x8 slots •User-configurable H/W monitoring •Auto-configuration of hard disk (with x4 signal) •One (1) PCI-X 133/100MHz slot types •Two (2) PCI 32-bit 33MHz slots •Multiple boot options •48-bit LBA support Total Five expansion slots from...

  • Page 7: Chapter 2: Board Installation

    Unplug the power from your computer power supply and then touch a safely grounded object to release static charge (i.e. power supply case). For the safest conditions, TYAN recommends wearing a static safety wrist strap. (2) Hold the motherboard by its edges and do not touch the bottom of the board, or flex the board in any way.

  • Page 8: Board Image

    2.1- Board Image This picture is representative of the latest board revision available at the time of publishing. The board you receive may or may not look exactly like the above picture.

  • Page 9: Block Diagram

    2.2 - Block Diagram Tempest i5000VF S5370 Block Diagram...

  • Page 10: Board Parts, Jumpers And Connectors

    2.3 - Board Parts, Jumpers and Connectors KB / MS CN2 3 CN21 U SB x 2 CPU0 DIMM 3 COM1 DIMM 2 DIMM 1 DIMM 0 VG A Intel Intel Intel LAN1 BF-VS MCH BF-VS MCH BF-VS MCH CPU1 CN 22 L AN2 C N2 0...
  • Page 11 Jumper Legend OPEN - Jumper OFF, without jumper cover CLOSED – Jumper ON, with jumper cover Jumper/Connector Function Clear CMOS Jumper IPMB Connector JP16 Video Disable Jumper CN1/CN3 EPS 12V Power Supply Connector CN11 COM1 Port CN12 Floppy Connector CN13 Keyboard/Mouse Connector CN14 IDE Connector...
  • Page 12 JP16...
  • Page 13 JP5: Clear CMOS Jumper Use this jumper when you forgot your system/setup password or need to clear system BIOS setting. How to clear the CMOS data Normal Power off system and disconnect power (Default) supply from AC source Use jumper cap to close Pin_2 and 3 for several seconds to Clear CMOS Replace jumper cap to close Pin_1 and 2 Reconnect power supply to AC source...
  • Page 14 CN25 CN26 CN15 CN28...
  • Page 15 Use these headers to connect to the USB devices via the enclosed USB cable. CN26: SMDC Connector The SMDC connector allows you to connect with Tyan Server Management Daughter Card (SMDC). The S5370 supports Tyan SMDC M3291. See Appendix II for more information on SMDC.
  • Page 16 CN21 CN23 CN20 CN22 CN24 CN19 SATA 0/1/2/3/4/5 CN23 (FAN1): Chassis Fan Connector Use this header to connect the chassis cooling fan to your motherboard to keep the system at optimum performance levels. Spe ed Con trol Ta chometer...
  • Page 17 CN22/CN24: Chassis Fan Connector Use this header to connect the chassis cooling G ND fan to your motherboard to keep the system at optimum performance levels. Tac homet er CN22: FAN2; CN24: FAN3 S peed Contro l CN20 (CPU_FAN1): CPU_FAN Connector Ta chomet er +12V Use this header to connect the processor cooling...
  • Page 18 SATA0/1/2/3/4/5: Serial ATA RAID Connector Connects to the Serial ATA ready drives via the Serial ATA cable You may use these six Serial ATA ports to have the support of RAID 0 and 1 through the on board Intel ESB2 chipset.

  • Page 19: Tips On Installing Motherboard In Chassis

    Some chassis’ include plastic studs instead of metal. Although the plastic studs are usable, TYAN recommends using metal studs with screws that will fasten the motherboard more securely in place. Below is a chart detailing what the most common motherboard studs look...

  • Page 20: Installing The Processor(S)

    2.5 - Installing the Processor(s) Your Tempest i5000VF S5370 supports the latest processor technologies from Intel. Check the TYAN website for latest processor support: http://www.tyan.com Processor Installation The processor should be installed carefully. Make sure you are wearing an antistatic strap and handle the processor as little as possible.
  • Page 21 Lift the metal cover to expose the socket interior and place the socket in as shown. Pin 1 Close the cover and return the locking lever to its locked position. Repeat this procedure for the second processor socket. Turn the board upside down and insert the heat sink spring mechanism as shown.
  • Page 22 Repeat this procedure for the second processor. Cooling Fan Installation After you have installed the processor, the heatsink should be installed to ensure that the processor runs efficiently and does not overheat. Use the heatsink supplied for best results. Follow these instructions to install the heatsink shown. Apply some (a little will work, more doesn’t equal better performance) thermal compound to the top of the processor.

  • Page 23: Installing The Memory

    Before installing memory, ensure that the memory you have is compatible with the motherboard and processor. Only DDR2-667/533 FB DIMM modules are required. Check the TYAN Web site at: www.tyan.com for details of the type of memory recommended for your motherboard.
  • Page 24 Memory Installation Procedure Follow these instructions to install memory modules into the Tempest i5000VF S5370. Press the locking levers in the direction shown in the following illustration. Align the memory module with the socket. The memory module is keyed to fit only one way in the socket. Key slot Seat the module firmly into the socket by gently pressing down until it sits flush with the socket.

  • Page 25: Attaching Drive Cables

    Attaching IDE Drive Cable Attaching the IDE drive cable is simple. These cables are “keyed” to only allow them to be connected in the correct manner. TYAN motherboards have two on-board IDE channels, each supporting two drives. The black connector designates the Primary channel, while the white connector designates the Secondary channel.
  • Page 26 Tyan has supplied two SATA cables and one SATA power adapter. If you are in need of other cables or power adapters please contact your place of purchase. The following pictures illustrate how to connect an SATA drive 1.SATA drive cable connection 2.

  • Page 27: Installing Add-In Cards

    2.8 - Installing Add-In Cards Before installing add-in cards, it’s helpful to know if they are fully compatible with your motherboard. For this reason, we’ve provided the diagrams below, showing the slots that appear on your motherboard. PCI Express x8 Slot PCI-X (64/133) PCI Slot Simply find the appropriate slot for your add-in card and insert the card...

  • Page 28: Connecting External Devices

    2.9 - Connecting External Devices The following diagrams will detail the rear port stack for this S5370 motherboard: PS/2 Mouse/Keyboard Gigabit Ethernet x 2 USB x 2 VGA Port Serial Port NOTE: Peripheral devices can be plugged straight into any of these ports but software may be required to complete the installation.

  • Page 29: Installing The Power Supply

    2.10 - Installing the Power Supply There are two power connectors on your Tempest i5000VF S5370. The Tempest i5000VF S5370 requires that you have an EPS12V power supply that has a 24-pin and an 8-pin power connector. Please be aware that ATX 2.x, ATX12V and ATXGES power supplies may not be compatible with the board and can damage the motherboard and/or CPU(s).
  • Page 30 NOTE...

  • Page 31: Chapter 3: Bios Setup

    Chapter 3: BIOS Setup 3.1. About the BIOS The BIOS is the basic input/output system, the firmware on the motherboard that enables your hardware to interface with your software. The BIOS determines what a computer can do without accessing programs from a disk. The BIOS contains all the code required to control the keyboard, display screen, disk drives, serial communications, and a number of miscellaneous functions.
  • Page 32 Chipset section unless you are absolutely sure of what you are doing. The Chipset defaults have been carefully chosen either by TYAN or your system manufacturer for best performance and reliability. Even a seemingly small change to the Chipset setup options may cause the system to become unstable or unusable.

  • Page 33: Bios Main Menu

    3.2 BIOS Main Menu In this section, you can alter general features such as the date and time, as well as access to the IDE configuration options. Note that the options listed below are for options that can directly be changed within the Main Setup screen. PhoenixBIOS Setup Utility Main Advanced...
  • Page 34 System Memory This display allows you to change the amount of system memory present on the system. Extended Memory This displays/allows you to change the amount of extended memory present on the system.
  • Page 35 3.2.1 IDE Primary/Secondary//Master/Slave Setup Computer detects IDE drive type from drive C to drive F. Press Enter on any of the Primary/Master, Primary/Slave, Secondary/Master, Secondary/Slave options to view advanced details of the corresponding drive. The system displays advanced details like the number of heads/cylinders/sectors on the detected disk and the maximum storage capacity of the disk.
  • Page 36 large mode, or it may be done using a different algorithm called LBA-assist translation. The translated geometry is still what is presented to the operating system for use in Int 13h calls. The difference between LBA and ECHS is that when using ECHS the BIOS translates the parameters used by these calls from the translated geometry to the drive's logical geometry.
  • Page 37 3.2.2 Memory Cache This setting allows you to tweak the various cache settings for optimal performance of your system. Press Enter to display the various cache settings. PhoenixBIOS Setup Utility Main Advanced Security Power Boot Exit Memory Cache Item Specific Help Controls caching of [Write Protect] system BIOS area.
  • Page 38 As such, it would be a waste of L2 cache bandwidth to cache the video BIOS instead of data that are more critical to the system's performance. In addition, if any program writes into this memory area, it will result in a system crash. So, it is recommended that you write protect this area for optimal system performance.
  • Page 39 3.2.3 Boot Features This option allows setting boot parameters. Press Enter to view the Boot Features screen. PhoenixBIOS Setup Utility Main Advanced Security Power Boot Exit Boot Features Item Specific Help Floppy check: [Disabled] Enabled verifies floppy [Enabled] type on boot; disabled Keyboard Error Report [Enabled] speeds boot.
  • Page 40 Spin up the hard disks as soon as power is supplied (or as soon as possible) Initialize only critical parts of the chipset Read memory size from the SPD (Serial Presence Detect) chip on the memory modules Eliminate logo delays If disabled, the BIOS will run the whole gamut of boot-up tests.

  • Page 41: Advanced Menu

    3.3 Advanced Menu This section facilitates configuring advanced BIOS options for your system. PhoenixBIOS Setup Utility Main Advanced Security Power Boot Exit Item Specific Help Installed O/S: Reset Configuration Data: [No] [DOS] Large Disk Access Mode: [LPC] Route Port 80h cycles to Advanced Chipset Control Advanced Processor Options I/O Device Configuration...
  • Page 42 Large Disk Access Mode This option determines whether a hard drive with more than 1024 cylinders, more than 16 heads and or more than 64 tracks per sector is present on the system. Set this option to DOS if such a hard drive is present. Else, set this option to Other.
  • Page 43 3.3.1 Advanced Chipset Control This section allows you to fine tune the chipset configuration. PhoenixBIOS Setup Utility Main Advanced Security Power Boot Exit Advanced Chipset Control Item Specific Help ICH USB Control Sub-Menu LAN Control Sub-Menu [Enabled] Crystal Beach Configure Enable [Single bit] SERR signal condition [256 MB ]...
  • Page 44 Memory Branch Mode This option is used to select the type of memory operation mode. Interleave / Sequential / Single Channel 0 Enhanced x8 Detection This feature is used to enable/disable enhanced x8 DRAM UC error detection. Enabled / Disabled Force ITK Config Clocking This feature is used to enable/disable FBD configuration for ITK test suite.
  • Page 45 3.3.1.1 ICH USB Control Sub-Menu PhoenixBIOS Setup Utility Main Advanced Security Power Boot Exit ICH USB Control Item Specific Help USB – Device 29, All Function: [Enabled] USB – Device 29, F1, F2 and F3: [Enabled] [Enabled] USB – Device 29, F2 and F3: [Enabled] USB –...
  • Page 46 3.3.1.2 LAN Control Sub-Menu These items allow you to control the LAN devices. PhoenixBIOS Setup Utility Main Advanced Security Power Boot Exit LAN Control Sub-Menu Item Specific Help LAN1 (Gilgal) [Enabled] Option ROM Scan: [Disabled] [Enabled] LAN2 (Gilgal) [Disabled] Option ROM Scan: ↑↓...
  • Page 47 3.3.2 Advanced Processor Options This section allows you to fine-tune the processor options. PhoenixBIOS Setup Utility Main Advanced Security Power Boot Exit Advanced Processor Options Item Specific Help Hyperthreading: [Enabled] [Disabled] Intel® Virtualization Technology [Enabled] C1 Enhanced Mode [Enabled] Execute Disable Bit [Disabled] Set Max Ext CPUID = 3 [Disabled]...
  • Page 48 Intel® Virtualization Technology This feature is used to enable the Vanderpool technology. Enabled / Disabled C1 Enhanced Mode (Available depending on CPU) This feature is used to enable the C1 Enhanced mode. Enabled / Disabled Execute Disable Bit This feature is used to set the Execute Bit function. Enabled / Disabled Set Max Ext CPUID=3 This feature is used to set Max CPUID extended function value to 3.
  • Page 49 3.3.3 I/O Device Configuration This setting allows you to configure I/O devices. PhoenixBIOS Setup Utility Main Advanced Security Power Boot Exit I/O Device Configuration Item Specific Help Floppy disk controller [Enabled] Serial port A: [Auto] ↑↓ Help Select Item Change Values Setup Defaults ←...
  • Page 50 3.3.4 DMI Event Logging PhoenixBIOS Setup Utility Main Advanced Security Power Boot Exit DMI Event Logging Item Specific Help Bios Version xxxx View the contents of the DMI event log. Event log validity Valid Event log capacity Space Avaliable [Enter] View DMI event log [Enabled] Event Logging...
  • Page 51 3.3.5 Hardware Monitor This displays critical system parameters like CPU speed, fan speeds, voltage levels and CPU temperature. PhoenixBIOS Setup Utility Main Advanced Security Power Boot Exit Hardware Monitor Item Specific Help Voltage Monitoring Cpu0 Fan No Installed Cpu1 Fan 5521 RPM Fan1 No Installed...
  • Page 52 3.3.5.1 Voltage Monitoring PhoenixBIOS Setup Utility Main Advanced Security Power Boot Exit Voltage Monitoring Item Specific Help v.12 11.750V VBat 3.096V 5.122V 3.336V 3.3Vsb 3.250V Vcpu0 1.322V Vcpu1 0.742V ↑↓ Help Select Item Change Values Setup Defaults ← → Exit Select Menu Enter Select...
  • Page 53 3.3.6 Console Redirection PhoenixBIOS Setup Utility Main Advanced Security Power Boot Exit Console Redirection Item Specific Help Com Port Address [Disabled] [19.2K] Baud Rate [VT100] Console Type [None] Flow Control [Direct] Console connection: [Off] Continue C. R. after POST: ↑↓ Help Select Item Change Values...
  • Page 54 3.4 Security These settings allow you to configure the security options for your system. PhoenixBIOS Setup Utility Main Advanced Security Power Boot Exit Item Specific Help Supervisor Password Is: Clear User Password Is: Clear [Enter] Set Supervisor Password [Enter] Set User Password [Disabled] Password on boot: ↑↓...

  • Page 55: Security Menu

    3.5 Power These settings allow you to configure the power options for your system. PhoenixBIOS Setup Utility Main Advanced Security Power Boot Exit Item Specific Help Resume On Time: [Off] Enabled wakes the Resume Time: [xx:xx:xx] system up at a specific time.

  • Page 56: Power Menu

    3.6 Boot Menu Use this screen to select options for the Boot Settings Configuration. PhoenixBIOS Setup Utility Main Advanced Security Power Boot Exit Item Specific Help 1: Legacy Floppy Drives Keys used to view or 2: IDE 1: ST300011A-(CS) configure devices: <Enter>...

  • Page 57: Exit Menu

    3.7 Exit Menu These settings set the exit options on your system. PhoenixBIOS Setup Utility Main Advanced Security Power Boot Exit Item Specific Help Exit Saving Changes Exit system Setup and Exit Discarding Changes save your changes to Load Setup Defaults CMOS.
  • Page 58 NOTE...

  • Page 59: Chapter 4: Diagnostics

    The most common type of error is a memory error. Before contacting your vendor or TYAN Technical Support, be sure that you note as much as you can about the beep code length and order that you experience. Also, be ready with information regarding add-in cards, drives and O/S to speed the support process and come to a quicker solution.

  • Page 60: Bios Post Code

    4.3 - BIOS Post Code Code Beeps / Description Code Beeps / Description Verify Real Mode Test CPU bus-clock frequency Disable Non-Maskable Initialize Phoenix Dispatch Interrupt (NMI) Manager Get CPU type Warm start shut down Initialize system hardware Shadow system BIOS ROM Initialize chipset with initial Autosize cache POST values...
  • Page 61 Enable cache before Enable external and CPU system BIOS shadow caches 1-4-1-1. RAM failure on Setup System Management data bits of high byte of Mode (SMM) area memory bus Code Beeps / Description Code Beeps / Description Display external L2 cache Check key lock size Load custom defaults...
  • Page 62 Clear huge ES segment BIOS Boot Block register Fixup Multi Processor table BIOS Boot Block 1-2. Search for option BIOS Boot Block ROMs. Check for SMART Drive Initialize the CPU (optional) Shadow option ROMs Initialize system timer Set up Power Management Initialize system I/O Initialize security engine Check force recovery boot...

  • Page 63: Appendix I: Smdc Information

    It enables any IT Manager by providing multi-interfaces to access the hardware remotely and perform monitor, control and diagnose activities effectively. Tyan SMDC is not a peripheral card. Unlike regular peripheral card such as AGP card, Network card or SCSI card, SMDC does not require any hardware specific driver.
  • Page 64 Features of Tyan Server Management Monitor various system components remotely - such as fans, processor temperature, and more Remote power on and power off Console redirect -the ability to view system remotely Alert and error actions -such as audible beep, e-mail, power down and reboot...

  • Page 65: Appendix Ii: How To Make A Driver Diskette

    Appendix II: How to Make a Driver Diskette Follow the steps below to make a driver diskette from the TYAN driver CD provided. Start the system and insert the TYAN CD into the CD-ROM drive to boot from CD. You will see the following menu. Then press [1] and [Enter] to boot the system to Tyan diskette maker.
  • Page 66 Follow the instruction on menu to insert a diskette and press [ENTER]. Please insert a formatted diskette into A:/ and press [ENTER] Writing image to drive A: Track: 36 Hoad: 8 Sector: 1 Using "ESC" key to quit the Tyan diskette maker. The system will automatically restart.

  • Page 67: Glossary

    Glossary ACPI (Advanced Configuration and Power Interface): a power management specification that allows the operating system to control the amount of power distributed to the computer’s devices. Devices not in use can be turned off, reducing unnecessary power expenditure. AGP (Accelerated Graphics Port): a PCI-based interface which was designed specifically for demands of 3D graphics applications.
  • Page 68 Bus: a data pathway. The term is used especially to refer to the connection between the processor and system memory, and between the processor and PCI or ISA local buses. Bus mastering: allows peripheral devices and IDEs to access the system memory without going through the CPU (similar to DMA channels).
  • Page 69 EEPROM (Electrically Erasable Programmable ROM): also called Flash BIOS, is a ROM chip which can, unlike normal ROM, be updated. This allows you to keep up with changes in the BIOS programs without having to buy a new chip. TYAN’s BIOS updates can be found at http://www.tyan.com EMRL: Embedded RAID Logic.
  • Page 70 IDE (Integrated Device/Drive Electronics): a simple, self-contained HDD interface. It can handle drives up to 8.4 GB in size. Almost all IDEs sold now are in fact Enhanced IDEs (EIDEs), with maximum capacity determined by the hardware controller. IDE INT (IDE Interrupt): a hardware interrupt signal that goes to the IDE. I/O (Input/Output): the connection between your computer and another piece of hardware (mouse, keyboard, etc.) Initial Program Load (IPL): a feature built into BBS-compliant devices, describing...
  • Page 71 PCI-to-PCI bridge: allows you to connect multiple PCI devices onto one PCI slot. Pipeline burst SRAM: a type of RAM that can maintain it’s data as long as power is provided to the memory chips. In this configuration, SRAM requests are pipelined, which means that larger packets of data are sent to the memory at one time, and acted upon quickly.
  • Page 72 RAM (Random Access Memory): technically refers to a type of memory where any byte can be accessed without touching the adjacent data, is often used to refer to the system’s main memory. This memory is available to any program running on the computer.
  • Page 73 UltraDMA-33/66/100: a fast version of the old DMA channel. UltraDMA is also called UltraATA. Without proper UltraDMA controller, your system cannot take advantage of higher data transfer rates of the new UltraDMA/UltraATA hard drives. USB (Universal Serial Bus): a versatile port. This one port type can function as a serial, parallel, mouse, keyboard or joystick port.

  • Page 74: Technical Support

    Return Merchandise Authorization (RMA) number. The RMA number should be prominently displayed on the outside of the shipping carton and the package should be mailed prepaid. TYAN will pay to have the board shipped back to you.
  • Page 75 Notice for the USA Compliance Information Statement (Declaration of Conformity Procedure) DoC FCC Part 15: This device complies with part 15 of the FCC Rules Operation is subject to the following conditions: This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation.

Table of Contents