Operating Mode "Settings - Bosch Nyon Operating Instructions Manual

English – 28

Operating mode "Settings"

This operating mode allows you to set the basic configurations of your on-
board computer.
Note: Some basic configurations can only be changed when Nyon is insert-
ed into the holder 4.
To reach the "Settings" menu, press the joystick 1 down in the main menu
until "Settings" is displayed.
Tip: If you press the joystick down long enough, you will also reach the
"Settings" menu.
The following configurations can be made:
– "Connections": You can configure the Bluetooth ® settings, a new
smartphone connection, a WiFi connection or a heart rate monitor.
When you enable WiFi, Nyon searches for available networks. Found
networks will be displayed. Use the joystick 1 to select the desired net-
work and enter the password.
– "My eBike": When Nyon is plugged in, you can change the pre-set value
given by the manufacturer of the wheel circumference by ± 5 %.
– "International": You can set speed and distance in kilometres or miles,
display clock in 12 or 24 hour format, select the time zone and set your
preferred language. The current time is automatically taken from the
GPS signal.

– "Map & Navigation": Here under "Map Style" you can select the dis-
play mode (2D or 3D) for "Freeride" and "Navigation" and turn on au-
tomatic adaptation of the map display depending on the ambient bright-
ness.
– "Brightness": You can adjust the brightness of the display here.
– "My Nyon": Here you can configure the Home button, automatically set
the counters such as trip meter, calories burned and average values to
0 every night, or reset Nyon to the factory settings.
W 276 001 DPNen | (23.9.14) Bosch eBike Systems