Operating Logic - Bosch Nyon Operating Instructions Manual

English – 14

Operating logic

For security reasons, Nyon does not have a touch screen. A change in the
display can be achieved during the journey via the operating unit 10. This
way both hands can stay on the handlebars while cycling.
With the control elements on the on-board computer, you have the follow-
ing options:
– Switch the on-board computer on or off using the On/Off button 5.
– The default mode of operation in "Settings > My Nyon" can be reached
via the "Home" (2 or 12) button.
– The bike lights can be switched on or off using the bike light button 6.
– Use the joystick 1 to navigate through the respective operating modes.
Make a selection by pressing the joystick 1.

Press left on the joystick 1 to overlay the active operating mode with the
main menu and to switch it to the main menu (see picture above).
If you press the joystick 1 right while in the active operating mode, the cur-
rent screen is overlayed with the potential configuration options of the cur-
rent operating mode. Move the joystick to the desired option and select it
by pressing the joystick 1.
Tip: If you are in an active operating mode, you can switch directly to the
next operating mode by pressing the joystick 1 up or down.
If Nyon is on the eBike, "Ride" is displayed after switching on the operating
mode. If Nylon is not mounted on the eBike, "Dashboard" is displayed on
the operating mode.
W 276 001 DPNen | (23.9.14) Bosch eBike Systems