Maintenance And Cleaning; After-Sales Service And Application Service - Bosch Nyon Operating Instructions Manual

English – 52

Maintenance and Cleaning

Please observe the operating and storage temperatures of the eBike com-
ponents. Protect the drive unit, on-board computer and battery against ex-
treme temperatures (e.g. from intense sunlight without adequate ventila-
tion). The components (especially the battery pack) can become damaged
through extreme temperatures.
An abrupt change of environmental conditions, can cause the screen to fog
up from inside. After a short time, a temperature adjustment takes place
and the fog disappears.
Keep the screen of your Nyon clean. Dirt can cause faulty brightness detec-
tion. The day/night switch-over in the navigation mode can be distorted.
Keep all components of your eBike clean, especially the battery-pack con-
tacts and corresponding holder contacts. Clean them carefully with a soft,
damp cloth.
All components including the drive unit may not be immersed in water or
cleaned with a high-pressure cleaner.
 Trouble-shooting actions may be performed by the owner except
those explicitly noted as "Contact your Bosch eBike dealer".

After-sales Service and Application Service

In case of questions concerning the eBike system and its components,
please refer to an authorised Bosch eBike dealer.
For contact data of authorised Bosch eBike dealers, please refer to
www.bosch-ebike.com
W 276 001 DPNen | (23.9.14) Bosch eBike Systems