Rudder Hinging - Hangar 9 Twin Otter ARF Assembly Manual

Step 4
Shown here is the cutout for the muffler. Use the
nacelle cutout made in step 29 as a guide for the
muffler opening in the cowling.
Step 5
Use a #1 Phillips screwdriver to install the cowling
with four #2 x 1/4-inch woodscrews.
28
Step 6
Install the spinner backplate and propeller and secure
them with the propeller washer and nut. Use a #1
Phillips screwdriver to secure the spinner cone with
the provided #4 x 7/16-inch screws.

Rudder Hinging

Parts Required
Fuselage Rudder
CA hinges (4)
Tools Required
T-pins Thin CA
Step 1
Prepare four CA hinges by inserting a T-pin in the
center of each hinge.
Twin Otter ARF Assembly Manual