Boot Menu - Getac S400 User Manual

CAUTION: Incorrect SATA mode settings can result in hard disk drive boot failure.
AMT Configuration
Enter to access the submenu as shown below.
Intel AMT:
Intel AMT Setup Prompt:
F1 Help
↑↓
Esc Exit
←→
Intel AMT
enables or disables Intel® Active Management Technology BIOS
extension execution. AMT allows the system administrator to access an AMT
featured computer remotely.
Intel AMT Setup Prompt
Setup appears or not during POST. If disabled, users cannot enter Intel AMT
Setup.
Virtualization Technology Setup sets Virtualization Technology parameters. Press Enter
to access the submenu as shown below.
configures Active Management Technology parameters. Press
Advanced
AMT Configuration
[Disabled]
Enabled
[Disabled]
Select Item +/-
Select Menu Enter
determines whether the prompt for entering Intel AMT
Item Specific Help
Enable/Disable
Intel(R) Active
Management Technology
BIOS Extension.
Note: iAMT H/W is
always enabled.
This option just
controls the BIOS
extension execution.
If enabled this
requires additional
firmware in the SPI
device
Change Values
Select  Sub-Menu
Using BIOS Setup and System Recovery
F9 Setup Defaults
F10 Save and Exit
5-7