Battery Tab - Getac S400 User Manual

is specifically designed to enhance platform security by providing a protected space
for key operations and other security critical tasks.
Current TPM State shows the current TPM state.
Change TPM State allows you to select between
& Disable
, and
Intel Trusted Execution Technology
capabilities provided by Intel® Trusted Execution Technology.
Boot Menu
The Boot menu sets the sequence of the devices to be searched for the operating
system.
Information
Boot priority order:
1. SATA ODD: PIORNEER DVD-RW DVRTD11RS
2. SATA HDD: WDC WD5000BPVT-22A1YT0
3. mSATA HDD:
4. USB ODD:
5. USB HDD:
6. USB FDD:
7. ESATA HDD1:
8. ESATA HDD2:
9. Other HDD:
10. PCI LAN: IBA GE Slot 00C8 v1365
F1 Help
Esc Exit
The bootable devices will be automatically detected during POST and shown here,
allowing you to set the sequence that the BIOS uses to look for a device from which
to load the OS.
Below is a brief description of keyboard usage:
5-14
Using BIOS Setup and System Recovery
Enable & Activate
Main Advanced
Select Item +/-
↑↓
Select Menu Enter
←→
No Change
.
enables utilization of additional hardware
Security
Change Values
Select Sub-Menu

Clear
, ,
Boot Exit
Item Specific Help
Keys used to view or
configure devices:
and arrows Select a

device. '+' and '-'
moves the device up or
down. 'Shift + 1'
enables or disables a
device. 'Del' deletes
an unprotected device.
F9 Setup Defaults
F10 Save and Exit
Deactivate
