Device Installation - XVision X720B User Manual

Please follow the steps listed below to install the device. Please refer to Figure 3-1 and Figure 3-2
X720B for reference.
l Paste the installation map on the surface of the wall or the ceiling.
l Dig the installation holes according to the installation map.
l Open the accessories bag and then take the expansion bolt out. Insert the expansion bolt into
the installation holes.
l Take the screws from the accessories bag and then use them to secure the device on the
installation surface of the wall or the ceiling.
l Connect the corresponding cables.
l Use the cross-head screwdriver to loosen the adjust screw.
Turn the device in different directions to make it suitable for the monitor position.
l
l Use the cross-head screwdriver to fix the adjust screw firmly.
Figure 3-1
6