Table of Contents
Advertisement
Quick Links
XPB700WDR
Model:
700 TVL Dynamic Night View,
Super WDR & Smart DNR Camera
Before you begin
•
Please unpack the box carefully and identify that all the parts are present.
The camera is suitable for indoor or outdoor use. Please bear in mind the following points when
choosing a mounting position.
•
The camera must be positioned so that it will not point directly into the sun (sunrise and
sunset) or any bright light, as this may cause damage to the camera.
•
Do not cut the camera cables, this will void the warranty.
•
Make sure you use only the recommended power supply. Damage caused to the camera by
incorrect voltage or wiring is not covered by the warranty.
Model:
XPB700WDR
B/W 700TVL Colour 580TVL,
Dynamic Night View, Super WDR,
Smart DNR for Disk Saving & Varifocal
Advertisement
Table of Contents
Related Manuals for XVision XPB700WDR
Summary of Contents for XVision XPB700WDR
-
Page 1: Before You Begin
XPB700WDR Model: 700 TVL Dynamic Night View, Super WDR & Smart DNR Camera Before you begin • Please unpack the box carefully and identify that all the parts are present. The camera is suitable for indoor or outdoor use. Please bear in mind the following points when choosing a mounting position. -
Page 2: Safety Precautions
2. Product Description The XPB700WDR camera is designed for high risk applications. It offers very high resolution images of 580 TVL in Colour mode and 700 TVL in B/W mode, with a low lux sensitivity of 0.0003 lux. It features Dynamic Night View, Super WDR, Smart DNR for disk saving and an Auto Iris Varifocal Lens. - Page 3 3. Features Sony 1/3" CCD Image Sensor, Samsung DSP Chip & Xvision X4 DSP Software 5.0 to 50.0mm Auto Iris Varifocal lens for 6° to 49° viewing angle for super sharp images and easy selection of the optimum viewing angle during installation.
-
Page 4: Product Assembly
5. Product Assembly When attaching the bracket to the camera be careful not to damage the cable. Figure 1... -
Page 5: Installation
6. Installation 1. Make a hole in the wall approximately 30mm wide x 40mm deep. 2. Drill 4 holes and insert the wall plugs. 3. Feed the cables into the wall before fixing the camera using the 4 fixing screws Figure 2 Fixing Holes Guide- Not shown actual size... -
Page 6: Lens Adjustment
7. Lens Adjustment The XPB700WDR is fitted with a Varifocal lens. You can make adjustments to both the Zoom and Focal Length by following these easy steps: STEP 1: Carefully unscrew the camera housing and pull the casing away. STEP 2: Connect the Video Output to the monitor or other video device through a 75 Ohms type coaxial cable. -
Page 7: Camera Osd Control
8. Camera OSD Control Press this Control Action Push DOWN UP, DOWN Select a new item to Setup LEFT, RIGHT Select a menu item menu SETUP (MENU) Access a sub menu 9. OSD Menu Structure SET UP MENU LENS Option VIDEO MANUAL EXPOSURE... -
Page 8: Setup Menu Functions
10. SETUP Menu Functions 1 LENS <Option: DC / VIDEO / MANUAL> Selects lens type and controls screen brightness. 2 EXPOSURE <Option: SHUTTER / AGC / SENS-UP / RETURN> Selects a desired mode. SHUTTER : Selects either auto or manual shutter. AGC: The higher the gain level, the brighter the screen -but the higher the noise. -
Page 9: Image Adj
10. SETUP Menu Functions (continued) 4 BACK LIGHT <Option: OFF / WDR / BLC> Selects a desired mode. OFF: Deactivates the WDR function. WDR (Super WDR): When there are both bright and dark areas at the same time, this mode makes both areas distinctive. BLC: Enables a user to directly select a desired area from a picture, and to view the area more clearly. - Page 10 10. SETUP Menu Functions (continued) FREEZE: You can view still or moving pictures. V-REV: You can flip the picture vertically on the screen. H-REV: You can flip the picture horizontally on the screen. D-ZOOM: You can use a digital zoom of x1~x10. SHARPNESS: As you increase this value, the picture outline becomes stronger and clearer.
- Page 11 10. SETUP Menu Functions (continued) - AREA MODE: Determines whether to use the MD area selected in SENSITIVITY. - SEL POS: Determines which of the 4 vertices of each MD area is to be used. - YPOS: Determines the coordinate of the vertical axis for SEL POS. - XPOS: Determines the coordinate of the horizontal axis for SEL POS.
- Page 12 10. SETUP Menu Functions (continued) 9 EXIT Press the SET button in the EXIT menu to save the current settings and exit the SET menu.
-
Page 13: Specifications
Picture Type: Day/Night (B/W & Colour) Image Sensor: Sony 1/3” CCD DSP: Samsung DSP Chip & Xvision X4 DSP Software Resolution: 700 TVL B/W 580TVL Colour Lens Viewing Angle: 6 to 49° Infra Red Nightvision: Not sensitive to IR Minimum Illumination: 0.0003 Lux... - Page 14 NOTES...
- Page 15 NOTES...
-
Page 16: Technical Support
TECHNICAL SUPPORT: For Technical Support for any Xvision product please contact your local distributor. LIMITED WARRANTY: This product is supplied with a limited 3 Year warranty. The Warranty excludes products that have been misused, (including accidental damage) and damage caused by normal wear and tear.