Saeco Lirika Operating Instructions Manual page 4

SAFETY INSTRUCTIONS
Never allow water to come into contact
with any of the electrical parts of the ma-
chine: danger of short circuit! Hot water
and steam may cause scalding!
Intended Use
The machine is intended to be used in small of-
fi ces/organisations only.
The appliance is not to be used by persons
(including children) with reduced physical,
mental or sensory abilities or with scarce expe-
rience and/or expertise, unless they are super-
vised by a person responsible for their safety,
or they are instructed by this person on how to
properly use the machine.
Power Supply
The machine must be connected to the power
supply by the service provider, in accordance
with its specifi cations.
Power Cord
Never use the machine if the power cord is de-
fective.
Report any defects in the cord and/or plug to
the service provider immediately. Do not pass
the power cord around corners, over sharp
edges or over hot objects and keep it away
from oil. Do not use the power cord to carry
or pull the machine. Do not pull out the plug
by the power cord or touch it with wet hands
• 4 •
or feet. Do not let the power cord hang freely
from tables or shelves.
For the Safety of Others
Ensure that children cannot play with the ma-
chine and/or the packaging materials. Never
direct the jet of hot water and/or steam to-
wards yourself or others. Do not touch the hot
water wand with bare hands. Always use the
handles or knobs provided.
Danger of Burns
Do not touch the hot water wand and/or the
coff ee/beverage dispensing spout.
Fire Safety Precautions
In case of fi re, use carbon dioxide (CO
guishers. Do not use water or dry powder ex-
tinguishers.
Suitable Location for Operation
and Maintenance
The machine should be installed by the service
provider in accordance with the safety regula-
tions in force at the time of installation.
The machine may only be moved by the service
provider.
Do not use the machine outdoors.
Avoid placing open fl ames and/or incandes-
cent objects near the machine so as not to
damage or melt the machine housing. Do not
use in places where the temperature may drop
to a level equal to and/or lower than 0°C. If the
machine has been exposed to such conditions
) extin-
2