Table of Contents
Advertisement
A = Soft water
B = Hard water (standard)
C = Very hard water
Immerse the "INTENZA+" water fi lter vertically in cold water
2
(with its opening positioned upwards) and delicately press its
sides so as to let the air bubbles out.
Remove the tank from the machine and empty it. Remove
3
the small white fi lter from the tank and store it in a dry place
sheltered from dust.
Machine Installation - Service Provider Manual
4
Put the fi lter into the empty tank. Press it to its limit stop.
5
Fill the tank with fresh drinking water and reinsert it into the
machine.
6
Switch to programming mode as described in section 10.1.
7
Press the "
played:
8
Press the "
" button (24) to confi rm.
9
Exit the programming menu and dispense about half the
water tank content to activate the fi lter.
10
Fill the water tank again up to the MAX level with fresh drink-
ing water.
" button (24) until the following menu is dis-
" button (18) to select "ON" and press the "
• 27 •
Hide quick links:
Advertisement
Table of Contents
