Do you have a question about the Saeco ROYAL PROFESSIONALS ESPRESSO MACHINE and is the answer not in the manual?
Questions and answers
Roger Scott
March 1, 2025
How to increase the amount of cfee on each setting
1 comments:
Mr. Anderson
March 1, 2025
To increase the coffee amount on the Saeco Royal Professional Espresso Machine, enter the programming mode and adjust the coffee quantity settings. Use the selection keys to navigate and modify the amount of coffee dispensed.
This answer is automatically generated
Subscribe to Our Youtube Channel
Related Manuals for Saeco Saeco ROYAL PROFESSIONALS ESPRESSO MACHINE
Summary of Contents for Saeco Saeco ROYAL PROFESSIONALS ESPRESSO MACHINE
Page 1
OY L P R O F E S S I O N A L TYPE SUP 016 E • User's and maintenance booklet We congratulate for having bought this top-quality espresso machine and thank you for choosing Saeco. Before operating the machine, we recommend to read the following instructions thouroughly which explain how to use, clean and maintain the machine.
How to use the instructions These instructions cannot anticipate every possible Save these instructions carefully and make sure to hand them to other use of the machine. users. For further information or questions concerning specific situations or problems, please contact the local dealer or manufacturer directly.
MACHINE CONTROLS AND PARTS 1 Coffee grounds container 16 Coffee bean container 2 Drip tray 17 Grind adjustment lever 3 Cup holder surface 18 Coffee dosage adjustment lever 4 Main switch 19 Service door 5 Power cord 20 Filling funnel 6 Coffee dispensing unit 21 Handle for assembling and disassembling of central unit...
DRAINAGE / PROGRAMMING THE MACHINE Remove water tank (11) from the machine, Drainage remove its cover (12) and fill it with cold water (approx. 2.4l). A valve on the tank bottom Direct the steam/hot water spout on the drip tray prevents water from escaping.
Page 8
PROGRAMMING THE MACHINE Cup heating plate connection menu item “PREBREWING” and select it by Royal Professional is equipped with a useful cup means of the ENT key. heating plate which can be disconnected, if The following message will be displayed: required.
Page 9
PROGRAMMING THE MACHINE By means of keys move the asterisk to key. The following message will be displayed: item “VENDING” and select it through the ENT key. From the displayed submenu it is possible to select one of the following items by means of the same keys .
Page 10
ENT a new value can be saved. On the The rinsing cycle needs about 1 litre of water contrary, by pressing ESC the new value entering (including final rinsing). From time to time, empty is stopped and, as a result, the former counter the water tank.
Page 11
coffee quantity, according to the cup dimension. Coffee dispensing The desired quantity can be selected Place one or two preheated cups on the cupholder through the selection keys . The relevant messages grill (3) under the dispenser (6). By pressing the will be displayed.
Page 12
CLEANING AND MAINTENANCE OPERATIONS key pressed till the desired amount is reached. checked by a special water level indicator (73). Fill the tank according to the procedure shown at page 86. Attention: cappuccino amount can only be programmed if the corresponding programming function is enabled (see Electronic temperature adjustment page 87).
Page 13
Cappuccinatore Clean the coffee beans container periodically; To quickly clean the cappuccinatore, immerse this operation should be accomplished the suction pipe into warm water and let water by a qualified technician! Unplug the machine. flow through it. For a more accurate cleaning, remove the Empty the coffee container and unloose the two cappuccinatore and open cover (29).
Page 14
Reset descaling message water. In programming function, by pressing keys Switch on the machine again and let water (2 move the asterisk till the end of the line on the menu l approx.) flow out of the steam/hot water dispensing tube in order to rinse away residues. Sign.
Possible causes Trouble The machine is not getting power No message is displayed The service door is open The automatic coffee brewing BREW UNIT MISS. does not start BREW UNIT BLOCK. WATERTANK EMPTY COF. BEANS EMPTY The automatic coffee brewing DREGDRAWER MISS.
Need help?
Do you have a question about the Saeco ROYAL PROFESSIONALS ESPRESSO MACHINE and is the answer not in the manual?
Questions and answers
How to increase the amount of cfee on each setting
To increase the coffee amount on the Saeco Royal Professional Espresso Machine, enter the programming mode and adjust the coffee quantity settings. Use the selection keys to navigate and modify the amount of coffee dispensed.
This answer is automatically generated