Packaging; Storage; Disposal - WEMPE 20097 Operating Instructions Manual

WEMPE digital main clock 20097
General Information

1.6 Packaging

If no arrangements have been made for taking back the packaging, please separate the
materials by kind and size for further use or waste recycling.
NOTICE! Environmental caretaking!
Packaging materials are made of valuable resources and can often be used again or
processed and recycled in a sensible way.

1.7 Storage

Always store the unit in its packaging until installation.
The unit shall be stored as follows:
– Keep it at a dry place. Relative humidity: 60 % at maximum.
– Do not store it outside or in an aggressive atmosphere.
– Protect it from direct sunlight. Storage temperature: 15 to 25 ° C (59 to 77 ° F)
– Store it dust-free and avoid mechanical shocks or damages.
– Do not store it beneath other items and do not charge it with other items.
– In case of a storage period of more that approx. 3 months, check necessary
mothballing measures.

1.8 Disposal

If no arrangements have been made with the manufacturer for taking back the unit, dismount
it in accordance with applicable safety and environmental protection regulations for disposal
and recycling of suitable components.
• Metal residues to be sent to be scrapped.
• Plastic components to be recycled.
• Separate the remaining components by material and dispose of them.
ATTENTION! Environmental risk!
Electronic components and batteries are hazardous waste and have to be treated
by approved hazardous waste disposal sites!
8
V3.0 01/2011