WEMPE digital main clock 20097
Operation
1.1.7 Lock the keyboard
In order to prevent maloperations lock the keyboard after having finished the setting.
1. Press the MENUE key for at least 4 seconds until the version number appears on the
display
2. Press the key 2 . The message on
the right appears:
3. Press the ENTER key. The message
on the right appears:
The keyboard is now locked.
4. Press the MENUE key to return to the time display.
1.2 Additional settings
1.1.1 Remove write protection for additional settings
The additional settings of the main clock are protected by a password.
The password is "345", unless a different password has been stipulated. If a different
password is pre-configured, this is indicated on a sticker on the last page of this manual.
Remove write protection:
1. Press the MENUE key for at least 4s until the version number appears on the display.
2. Press the key 1 several times until
the message on the right appears on
the display:
3. Enter the safety code to remove the write protection.
4. Press the ENTER key for
confirmation. The message on the
right appears on the display :
The write protection for the additional settings is now removed.
NOTICE!
When quitting the setting menu, the write protection is automatically activated again.
24
V3.0 01/2011