Table of Contents
Advertisement
B
ASIC SERVICE
The MiniMAC requires simple routine maintenance. The schedule depends heavily
on the operating environment; please consult a Martin service technician for
recommendations.
Refer all service not described here to a qualified Martin technician.
Important! Excessive dust, grease, and smoke fluid buildup degrades
performance and causes overheating and damage to the fixture
that is not covered by the warranty.
Warning!
Disconnect the fixture from power before removing any cover.
To open the head
1 Turn off the lamp and allow it to cool for at least 5 minutes. Disconnect the fixture from
power.
2 Unlock the head cover fasteners by turning them a quarter-turn counterclockwise.
3 Open the lamp access cover by pulling from the ribbed end.
4 Pull off the top head cover.
5 When replacing the cover, turn the fasteners a half to a quarter turn clockwise until
they click. Do not overtighten.
C L E A N I N G
To cl ean optical components
Use care when cleaning optical components. The surface of the color filters is
fragile and small scratches may be visible.
1 Disconnect the fixture from power and allow the components to cool completely.
Remove the head cover.
2 Blow or vacuum away loose dust. Remove residues from lenses and filters with a soft
cloth or cotton swabs wetted with isopropyl alcohol. Regular glass cleaner may also
be used, but no residues may remain.
Basic service
11
35
Advertisement
Table of Contents
