Martin Professional MiniMAC Wash User Manual page 29

To execute the routine from the control panel
1 Verify that
2 Select
- To set a single fixture, select
- To set a master fixture, select
- To set a slave or a synchronized fixture, select
Press [enter].
3 Press [menu] to exit the
4 To disable execution, select
To execute scenes with an MC-X Controller
1 Connect the MC-X controller to the MiniMAC's data input. If multiple MiniMACs are
connected, plug the controller into the first fixture in the link.
2 On each fixture, set fade and wait times as described above. Set
OFF
3 To trigger individual scenes, press the Preset buttons on the MC-X.
The fixture or fixtures fade to the selected scene and then hold until another button
is pressed. If a fixture does not have a scene programmed at the selected number, it
executes the last-received DMX commands since the fixture was powered up. If the
fixture has not received DMX commands, it goes to its default (blackout) position.
4 To have each fixture run it's routine, press [Auto].
SA En A
> is set to
r un Ctr
from the
Ct r
and press [enter].
Programmed Stand-alone
OFF
.
menu and press [enter].
S in.
S nd.
menu. Execution begins.
Ct r run OFF
> >
rE c
.
and press [enter].
C tr r un
> to
29