Novra S300N User Manual page 34

6) I have created a mapping rule, but the packets don't seem to be mapped. I don't see either the
Original IP packets or the New IP packets when I sniff the LAN.
Make sure your mapping action rule is Normal or Forward,
-
If your mapping action is Normal and you have IGMP filtering enabled, make sure you have an
-
application running that will generate an IGMP join to receive the packets. Otherwise you could try to
turn IGMP filtering off, or set your mapping action rule to Forward. Note: if you set your mapping
action rule to No Rule, the Original IP packets will not get mapped and the IP traffic on your LAN will
be your Original IP packets.
7) I am trying to update the firmware, but I keep getting a Code Download Failed timeout
error?
Try changing the IP address of your receiver to 192.168.0.x and change the IP address of your
-
configuration PC to the same subnet, such as 192.168.0.100. Do not use 192.168.0.1 or the same IP
address as your S300.
Version: 1.2
Confidential and Proprietary 34 of 40