Novra S300N User Manual page 23

8) Input Stream ID Filter: The Input Stream Identifier (ISI) Filter may be used by your receiver to
filter streams based this value. If the ISI checkbox is selected, then the receiver will only
demodulate streams that have an ISI value that is the same as the value shown in the ISI box. This
command should only be used if the ISI stream value is set on the incoming DVB-S2 stream and if
the ISI value is know. You may have to contact your uplink provider for assistance. For DVB-S
operation, the ISI input will be grayed out.
NOTE:
then the contents of the ISI Filter box will be ignored by the receiver.
9) Apply: By pressing this button, the updates are sent to the receiver.
10) Exit: Exits back to the main screen
Version: 1.2
If the Search Mode is set to Both and the received stream is DVB-S,
-
Confidential and Proprietary 23 of 40