4 Configuring the S300
This chapter discussed how to configure the S300. It covers both the drop down menus as well as the
configuration buttons.
When editing field lists (such as PID lists), you can often edit or delete the list
NOTE:
entries by right clicking on them.
Pressing Esc on the keyboard when configuring the S300 has the same effect
NOTE:
as selecting Exit.
4.1 Interfaces
The Interfaces group of buttons enables the operator to configure the 3 key interfaces on the S300, namely
the LAN or Network interface, the Satellite or L-Band interface, and the CAM interface. These are all
discussed further below.
4.1.1 Network Button
The network settings of the S300 may be modified by selecting the Network Button and changing the
appropriate fields (as shown below).
Version: 1.2
Figure 6 - Network Configuration Dialog Box
Confidential and Proprietary
18 of 40