4 Configuring the A75
This chapter discussed how to configure the A75.
NOTE:
When configuring the A75, mousing over different parts of the Console screens
will provide pop-up of context-sensitive help information.
4.1 Configure
Selecting the Configure button brings up the following four sub-menu items that enable the operator to:
•
Network – Configure the network interface
•
Channel – Configure the ATSC channel number
•
Content – Configure the PID content
•
Reset - Reset the A75
4.1.1 Network Button
The Ethernet network settings of the A75 may be modified by selecting the Network Button and changing
the appropriate fields (as shown in the figure below).
Version: 1.02
Figure 3 – A75 Configure Sub Menu
Confidential and Proprietary
12 of 32