How To Charge The Battery; Automatic Charging - LG VR59xxL series Owner's Manual

Automatic charging

The Roboking returns to the home station at the end of a cleaning cycle
or when its battery is running low.
If the Roboking is unable to dock to the home station on its first at-
tempt, it will try again until it docks successfully.
When the Roboking has cleaned all areas that it can clean, it will
return to the home station even when the battery level is not low.
Manual charging
If using the Roboking for the first time or to charge the battery by interrupting the cleaning, you can
manually charge the battery.
If the Roboking is within 10 cm (3.9 in) of the front of the charging terminal while the power supply is
turned on, it will automatically be returned to the home station and charging will begin.
Tip
Take the following precautions when using the home station:
If foreign material is caught in the charging terminal, charging may not proceed smoothly.
Wipe the terminal from time to time with a dry cloth after the power plug is disconnected.
To prevent electric shock, do not touch the charging terminal with any metallic objects.
To avoid fire or electric shock, never disassemble or modify the home station.
Do not to place the home station or power plug near to a heating appliance.

HOW TO CHARGE THE BATTERY

Method 1. Attach the Roboking to the home station by matching
up the two arrows on the Roboking and the home
station. A melody will sound and charging will begin.
When the R o b o k i n g is attached to the home station,
and a "TING" sound is generated repeatedly, please
check and ensure that the main On/Off on the underside
of the Roboking is in the ON position.
Method 2. When the HOMING button of the remote control
charging will start automatically when the Roboking has
returned to the Home Station.
16