How To Install The Home Station - LG VR59xxL series Owner's Manual

HOW TO INSTALL THE HOME STATION

How to Install the Home Station
1. Position the home station against a wall, to prevent sliding dur-
ing docking, on hard level flooring.
Remove objects within 1.5m. to the right and left side and
within 2m. to the front.
2. Plug the power cord into an outlet.
Wrap the power cord around the fixed hanger on the back side
of the home station or along the wall surface so that the travel
path of the Roboking will not be obstructed.
3. Fix the home station against the wall so that it does not move.
Tip
will not return to the station to charge automatically.
Since the Roboking cleans along the wall, if the charging station is installed on the straight
surface of the wall, you can get a more efficient cleaning.
Do not operate the Home Station if it has a damaged cord or plug, if it is not working properly,
or if it has been damaged or dropped. To avoid any electrical hazard, the cord must be replaced
by LG Electronics, or a qualified service person.
13
Fixing groove of power cord
Roboking