Inbound Filters - D-Link SharePort Go DIR-506L User Manual

Section 3 - Configuration
The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can
configure inbound data filtering rules that control data based on an IP address range. Inbound Filters can be used with Virtual
Server, Port Forwarding, or Remote Administration features.
Inbound Filter: Check the Enable box to allow inbound filtering rules.
Use schedule
Select from the drop-down menu how you want the rule
rule:
to be scheduled and apply this schedule to existing rules.
Inbound Filter
This section will list any rules that are created. You may
Rules List: click the Edit icon to change the settings or enable/
disable the rule, or click the Delete icon to remove the
rule.
Allow/Deny all
Here you decide whether to use the inbound filters to
to pass:
allow or deny passage of addresses and ports that match
the filter rules you set.
Source IP and
Enter the source IP address and port. Enter 0.0.0.0 if you
Ports:
do not want to specify an IP range.
Destination IP
Enter the destination IP address and port. Enter 0.0.0.0 if
and Ports:
you do not want to specify an IP range.
Enable: Check this box to enable the rule you are creating.
Schedule Rule #: Specify the schedule rule number to use, or click Add
New Rule... to create a new schedule. To create schedules,
please refer to "Schedules" on page 64.
D-Link DIR-506L User Manual

Inbound Filters

51