Advanced; Virtual Server - D-Link SharePort Go DIR-506L User Manual

Section 3 - Configuration
This will allow you to open a single port. If you would like to open a range of ports, refer to "Application Rules" on page 47. After
making your changes, click the Save Settings button.
Well-known This contains a list of pre-defined services. You can select
Services: a service, select a rule ID, then click the Copy to button to
copy the default settings for that service to the specified
rule ID.
ID: Specifies which rule to copy the selected Well known
service settings to when you click the Copy to button.
Use schedule Select a schedule to use and copy to the specified rule
rule: ID when you click the Copy to button. You may select
Always On or use a specific schedule that you have
defined. To create and edit schedules, please refer to
"Schedules" on page 64.
ID: This identifies the rule.
Service Ports: Enter the external ports you want to open for the service.
Server IP: Port: Enter the IP address and ports of the computer on your
local network that you want to allow the incoming service
through.
Enable: Tick the checkbox to enable the specified rule.
Schedule Rule #: Specify the schedule rule number to use, or click Add
New Rule... to create a new schedule. To create schedules,
please refer to "Schedules" on page 64.
D-Link DIR-506L User Manual

Advanced

Virtual Server

46