Section 3 - Configuration
The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can
configure inbound data filtering rules that control data based on an IP address range. Inbound Filters can be used with Virtual
Server, Port Forwarding, or Remote Administration features.
Enter a name for the inbound filter rule.
Name:
Select Allow or Deny.
Action:
Remote IP
Check the box to enable the rule.
Range: Enable:
Remote IP Start:
Enter the starting IP address.
Remote IP End:
Enter the ending IP address.
Click the Add button to apply your settings.
Add:
Inbound Filter
This section will list any rules that are created.
You may click the Edit icon to change the
Rules List:
settings or enable/disable the rule, or click
the Delete icon to remove the rule.
D-Link DIR-816L User Manual
Inbound Filters
91