D-Link SharePort Go DIR-506L User Manual page 40

Section 3 - Configuration
If you chose Router mode you can configure the DIR-506L as a router. After making changes to the wireless network settings,
click the Save Settings button.
Enable Wireless: Check Enable Wireless to enable the wireless function. If
you want to disable wireless functions, uncheck the box.
Wireless When you are browsing for available wireless networks,
Network Name:
this is the name that will appear in the list (unless Visibility
Status is set to Invisible, see below). This name is also
referred to as the SSID. For security purposes, it is highly
recommended to change from the default network name.
802.11 Mode: Select one of the following based on your needs:
• 802.11b Only: Select this for 802.11b wireless clients.
• 802.11g Only: Select this for 802.11g wireless clients.
• 802.11n Only: Select this for 802.11n wireless clients.
• Mixed 802.11g and 802.11b: Select this if you are
using a mix of 802.11g and 11b wireless clients.
• Mixed 802.11n and 802.11g: Select this if you are
using a mix of 802.11n and 11g wireless clients.
• Mixed 802.11n, 802.11g and 802.11b: Select this if
you are using a mix of 802.11n, 11g, and 11b wireless
clients.
Enable Auto Select Auto Channel Scan to automatically choose the
Channel Scan:
channel with the least amount of interference.
Wireless
If Auto Channel Scan is unchecked, choose the channel
Channel: you want to use for wireless communication.
Channel Width: Use the drop down menu to choose the width of the
wireless channel you want to use.
Visibility Status:
If you want to broadcast the name of your wireless
network choose Visible. Choose Invisible to hide it.
D-Link DIR-506L User Manual
Manual Wireless - Router Mode
36