Inbound Filters - D-Link DIR-866L User Manual

Section 3 - Configuration
The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can
configure inbound data filtering rules that control data based on an IP address range. Inbound Filters can be used with Virtual
Server, Port Forwarding, or Remote Administration features.
Enter a Name for the inbound filter rule.
Name:
Select Allow or Deny.
Action:
Check the box to Enable the rule.
Remote IP
Range: Enable:
Enter the starting IP address.
Remote IP Start:
Remote IP End: Enter the ending IP address.
Click the Add button to apply your settings.
Add:
Inbound Filter This section will list any rules that are created. You
may click the Edit icon to change the settings or
Rules List:
enable/disable the rule, or click the Trash icon to
delete the rule.
D-Link DIR-866L User Manual

Inbound Filters

86