Setting Up Your Dir-506L - D-Link SharePort Go DIR-506L User Manual

Section 2 - Installation
1. Slide off the cover and insert the battery. Make sure the gold
contacts align with the gold terminals. Slide the cover back
on.
2. Connect the USB cable to the DIR-506L and then connect to a
USB port on your computer.
Note: Charge the device using the USB cable for at least 4
hours or until it is fully charged before usage.
3. Use the following information to connect to your DIR-506L
wirelessly:
Default WiFi SSID: DIR506L-####
Default Password: 0266000123
#### is the last 4 digits of your MAC address, which is printed on a label placed in the
*
battery compartment of the DIR-506L.
4. Open a web browser, and go to http://dlinkrouter.local. By
default, the User Name is admin, and the Password should
be left blank. After logging in, the Setup Wizard will appear,
which is described on the following pages.
D-Link DIR-506L User Manual

Setting Up Your DIR-506L

-
+
*
-
+
LAN
LAN
ON
OFF
ON
5V
OFF
5V
LAN
LAN
ON
OFF
ON
5V
OFF
5V
9